Availability: In Stock
Ceragon Fibeair 2000 Carrier-Class, High-Capacity Sub-6GHz Backhaul Solution
Introducing FibeAir 2000
The new FibeAir 2000 Sub-6GHz radio series delivers high capacity, extended range and carrierclass performance for todays and tomorrows networks.
FibeAir 2000 is the solution of choice for carriers looking for affordable backhaul solutions. While demand for mobile bandwidth and migration to 3G and 4G networks will require carriers to increase significantly their backhaul capacity, they can not expect a similar growth in ARPU and are thus looking for high-capacity, cost-effective backhaul solutions.
FibeAir 2000 enables carriers to accommodate capacity growth and maintain profitability through unparalleled price and excellent performance. The high-capacity radio system provides 50 Mbps full-duplex net throughput, with a flexible combination of Ethernet and up to 16 E1/T1 interfaces and a range of up to 120 km/75 miles in various sub-6GHz frequencies.
FibeAir 2000 offers native Ethernet and native TDM over a single wireless link, enabling carriers to migrate to Ethernet with no additional cost and to protect their investment in the legacy TDM infrastructure. Built on Ceragons FA2000 proprietary air interface together with advanced built-in Diversity, MIMO and OFDM technologies, it delivers optimal performance and unmatched robustness in all environments.
FibeAir 2000 solutions are ideally suited for applications such as backhaul for cellular and WiMax networks, access and backhaul solutions for ISPs, enterprise networks, as well as for temporary applications for both carriers and private networks.
- 50 Mbps full-duplex net throughput
- Up to 16 E1s/T1s
- Superior OFDM and MIMO technology
- Unparalleled performance•
- Extended range
- Easy to install, simple to maintain
- Competitively priced
FibeAir 2000
Configuration
Architecture
- ODU: Outdoor Unit with Integrated Antenna or Connectorized for External Antenna
- IDU: Indoor Unit for combination of E1/T1 and Ethernet interfaces or PoE device for Ethernet only
IDU to ODU Interface
Outdoor CAT-5e cable; Maximum cable length: 100 m
Radio
Capacity
50 Mbps capacity (net throughput, full duplex)
Range Up to 120 km / 75 miles
Frequency Bands
4.9 – 5.9 GHz, 2.3 – 2.5 GHz
Channel Bandwidth
20 MHz
Modulation
2x2 MIMO-OFDM (BPSK/QPSK/16QAM/64QAM)
Adaptive Modulation & Coding
Supported
Automatic Channel Selection
Supported
Max Tx Power
27 dBm @ 2.4 GHz; 25 dBm @ 5.8 GHz
Radio Regulation
FCC, IC (Canada), ETSI, WPC (India), China
Duplex Technology
TDD
Error Correction
FEC k = 1/2, 2/3, 3/4, 5/6
Encryption
AES 128
TDM Interface
Number of E1/T1 ports
Up to 16
Framing
Transparent to unframed or framed
Timing
Independent clock per port, Tx and Rx
Connector
RJ-45
Standards Compliance
ITU-T G.703, G.826
Line Code
E1: HDB3, T1: B8SZ/AMI (configured by FA2000 Manager)
Latency
Configurable, 5 - 20 msec
Impedance
E1: 120Ω balanced; T1: 100Ω balanced
Jitter and Wander
Compliant with ITU-T G.823, G.824
Ethernet Interface
Number of Ethernet ports
2
Type
10/100BaseT with Auto-Negotiation (IEEE 802.3u)
Framing/Coding
IEEE 802.3
Line Impedance
100 Omega
VLAN Support
Transparent
Connector
RJ-45
Maximum Frame Size
2048 Bytes
Latency
3 msec (typical)
Management
Management Application
FA2000 Manager
Protocol
SNMP and Telnet
Mechanics
Dimensions
ODU with Integrated Antenna: 37.1(w) x 37.1(h) x 9.00(d) cm; 3.5 kg / 7 lbs
ODU Connectorized: 18.0(w) x 27.0(h) x 5.5(d) cm; 1.5 kg / 3.0 lbs
IDU: 48.3(w) x 4.5(h) x 29(d) cm; 1.5 kg / 3.3 lbs
Power
Power Feeding
Dual feeding, -20 to -60 VDC (AC/DC converter is available)
Power Consumption
< 35 W (IDU+ODU)
Environmental
Operating Temperatures
ODU: -35degC to +60degC / -31deg;F to +140degF IDU: 0degC to +50degC / -4°F to +122°F
Humidity
ODU: Up to 100% non-condensing, IP67 IDU: 90% non-condensing
Safety and EMC
TUV
UL/EN/IEC 60950, CAN/CSA 60950 C22.2
EMC
CFR47 Class B, Part15, Subpart B
ETSI
EN 300 386, EN 301 489-4, EN 301 489-1
CAN/CSA-CEI/IEC, AS/NZS
CISPR 22
