EnGenius EAP3660 Wireless Access Point

The EnGenius EAP3660 is a small form factor wireless product. It is stylish and looks like a smoke detector on the ceiling. The EnGenius EAP3660 is a Wireless Access Point / Repeater / WDS that operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and faster 802.11g (2.4GHz, 54Mbps) wireless standards. It's the best way to add wireless capability to your existing wired network, or to add bandwidth to your wireless installation.



DD-WRT is available for the 3660 but please take note that no support will be given when the unit is flashed with 3rd party firmware.

The EAP3660 from EnGenius features high transmitted output power and high receivable sensitivity along with antenna diversity. High output power and high sensitivity can extend range and coverage to
reduce the roaming between Access Points to get a more stable wireless connection.

To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA/WPA2. The MAC address filter lets you select exactly which stations should have access to your network. In addition, the User Isolation function can protect the private network between client users. The attractive design, high performance, and array of features make EnGenius EAP3660 a suitable wireless solution for your residence or office.

Package Content

• 1 x High power multi-function AP  (EnGenius EAP3660)
• 1 x 12V/1A Power Adapter
• 1 x CAT5 UTP Cable
• 1 x QIG
• 1 x CD (User’s Manual)
• 1 x wall mount screw set

Features & Benefits 

• Super G solution up to 108Mbps   Capable of handling heavy data payloads such as MPEG, video streaming, large file transfer and VoIP 
• High Output Power up to 28 dBm   Extended excellent Range and Coverage (fewer APs) 
• IEEE 802.11b/g Compliant  Fully Interoperable with IEEE 802.11b/IEEE802.11g compliant devices 
• Embedded Antenna   Users won't see antenna in your building environment 
• Point-to-point, Point-to-multipoint Wireless Connectivity  Let users transfer data between two buildings or multiple buildings 
• WDS (Wireless Distributed System)  Make wireless AP and Bridge mode simultaneously as a wireless repeater 
• Repeater  The easiest way to expand your wireless network's coverage 
• Support Multi-SSID function (4 SSID) in AP mode  Allow clients to access different networks through a single access point and assign different policies and functions for each SSID by manager 
• Antenna diversity support  Enhance the traffic signal 
• WPA2/WPA/ IEEE 802.1x support  Powerful data security 
• MAC address filtering in AP mode(up to 50)  Ensures secure network connection 
• User isolation support (AP mode)  Protect the private network between client users. 
• Power-over-Ethernet (IEEE802.3af)  Flexible Access Point locations and cost savings 
• Keep personal setting  Keep the latest setting when firmware upgrade 
• SNMP Remote Configuration Management  Help administrators to remotely configure or manage the Access Point easily. 
• QoS (WMM) support  Enhance user performance and density 

Hardware Specifictions

Expansion Slots  N/A 

Physical Interface 

• LAN: One 10/100 Fast Ethernet RJ-45
• Reset Button
• Power Jack 

LEDs Status

• Power/ Status
• LAN (10/100Mbps)
• WLAN (Wireless Connection) 

Power Requirements 

• Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz (depends on different countries)
• Active Ethernet (Power over Ethernet, IEEE802.3af)- 48 VDC/0.375A
• Device: 12V/1A 

Regulation Certifications 

FCC Part 15, ETSI 300/328/CE 

Housing Look

RF Specification

Frequency Band  2.400~2.484 GHz 
Media Access Protocol  Carrier sense multiple access with collision avoidance (CSMA/CA) 

Modulation Technology

• OFDM: BPSK, QPSK, 16-QAM, 64-QAM
• DBPSK, DQPSK, CCK 
• Operating Channels  11 for North America, 14 for Japan, 13 for Europe 
• Receive Sensitivity (Typical)
• IEEE802.11g 6Mbps@ -92dBm 54Mbps@ -74dBm
• IEEE802.11b  

• 1Mbps@ -97dBm 11Mbps@ -89dBm 
• Available transmit power
• IEEE802.11g 26dBm@6~24 Mbps 25dBm@36 Mbps 23dBm@48 Mbps 22dBm@54Mbps
• IEEE802.11b 27dBm@1 ~ 11Mbps 
• Antenna  Directional Embedded antenna (Diversity support) Antenna Gain = 4 dBi 

Software Features

Setting

• Topology  Infrastructure 
• Operation Mode  Access Point/ Repeater/WDS 
• LAN  DHCP Client 
• VPN  VPN pass-through (PPTP, L2TP, IPSEC) 

Wireless

• Wireless Mode – 11b / 11g / Super G / Disable .Channel Selection (Setting varies by Country)
• Transmission Rate • 11 b/g: 108, 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
• Transmit power control (by dBm)
• Antenna Diversity 

Security

• WEP Encryption-64/128/152 bit
• WPA Personal (WPA-PSK using TKIP or AES)
• WPA Enterprise (WPA-EAP using TKIP)
• 802.1x Authenticator .Hide SSID in beacons
• Multiple SSID with 802.1q VLAN tagging (up to 4 SSIDs)
• MAC Filter
• L2 isolation
• Wireless STA (Client) connected list 
• QoS
• WMM 

Management

Configuration  Web-based configuration (HTTP)/Telnet

Firmware Upgrade

• Upgrade firmware via web-browser
• Keep latest setting when f/w update 
• Administrator Setting  .Administrator password change 
• Reset Setting
• Reboot (press 1 second)
• Reset to Factory Default (press more than 5 seconds) 
• System monitoring  Status, Statistics and Event Log 
• SNMP  V1, V2c 
• MIB  MIB I, MIB II (RFC1213) 
• Backup & Restore  Settings through Web 

Environment & Physical

Temperature Range

• Operating: 0°C to 45°C (32°F to 113°F)
• Storage: -20°C to 70°C (-4°F to 158°F) 
• Humidity (non-condensing)  5%~95% typical 
• Dimensions  Diameter:120mm Height: 50mm 
• Weight  280g 

Technical Specifications

Specifications Tab

Questions Tab