EnGenius ENH-200 2.4GHz Long Range 11n Outdoor Wireless Client Bridge & Access Point

Based on 1 ratings.

SKU:ENH-200

12 to 24V DC/DC converter (12TO24V):
30mm Jubilee Clip to fit WLMNT (WLMNT-30MMCLIP):
20" J Pole fixed Wall mount:
POE-CARSOCKET-50CM:
POE-(12V7AHLEADACID):

If you are a Wireless or comms reseller and are interested in selling 4Gon products as part of your business offering, you can apply to become an authorised reseller. Once accepted, you will have access to reseller pricing. Apply now

EnGenius ENH200 Outdoor Wireless Access Point Datasheet (PDF)
EnGenius ENH200 Outdoor Wireless Access Point User Manual (PDF)

Key Features

Product Details
Specification
Reviews
Questions

Please note: The EnGenius ENH-200 is End of Life. Please see the EnGenius EnGenius ENS-200 as an alternative.

EnGenius ENH200 2.4GHz Long Range 150Mbps 11n Outdoor Wireless Client Bridge & Access Point

For alternative wireless equipment please check out Ubiquiti NanoStation 2

Business Class Long Range Wireless N Outdoor Client Bridge/Access Point

ENH-200 is a long-range outdoor wireless Client Bridge/ Access Point that operates on 2.4GHz frequency spectrum and provides high wireless data rate up to 150Mbps. The EnGenius ENH200 features high transmitted output power, high receivable sensitivity and built-in dual polarization directional antenna. The high power can extend wireless range coverage. The dual polarity antenna allows installer to choose the best orientation to avoid interference, thus maximizing performance and stability.

Supporting highly secure WPA/WPA2 encryption and MAC address filter ensure an uncompromised network security. Furthermore the MAC address filter allows administrator select exactly which client stations can access to your network or not. The RSSI signal strength indicators, PoE injector, mast strap and wall mount accessories that come with the pack makes installation an easy work.

EnGenius' EnGenius ENH200 is a perfect solution for integrators and installers to establish building-to-building wireless network connection; for service provider to use as a high performance CPE; for IP security camera installer deploying camera at the outdoor environment.

Basic Info

User Type: Business
Technology: Wireless N
Model Number: EnGenius ENH200

The following list summarizes the key features of the EnGenius ENH200

High-output power up to 26 dBm delivers superior range and coverage
Fully interoperable with IEEE 802.11b/IEEE 802.11g/IEEE 802.11n-compliant devices
High-speed data rates up to 150 Mbps make the EnGenius ENH200 ideally suited for handling heavy data payloads such outdoor security camera, video streaming, etc.
WPA2/WPA/ WEP/ IEEE 802.1x support and MAC address filtering ensure secure network connections
RSSI indicator makes it easy to select the best signal for Access Point connections
Power-over-Ethernet capabilities allow for flexible installation locations and cost savings
Four SSIDs let clients access different networks through a single Access Point, and assign different policies and functions for each SSID
Multi-function operation (CB/AP/WDS/APRouter) modes provide flexible deployment
The AP-Router mode with PPPoE/PPTP, DHCP server function support in special network deployment in which the CPE also serves as Internet gateway
QoS (WMM) support enhances performance and user experiences

Key Differentiators

High-Power Long Range cover
Maximum 500mW Power output ensures robust signal overcoming long distances barrier
Provides superior Wi-Fi coverage over competitors
High performance three time as fast as wireless G. The Maximum wireless connection rate is up to 150 Mbps. Backward compatible to wireless b/g network.
Integrated Dual Polarity Antenna Design
Selectable vertical or horizontal antenna polarity to avoid interference and Maximize performance
Design for Outdoor Deployment
IP55 waterproof housing against rain, moisture
Cable accessory kit prevents rain and dew from getting into the device from a cable connection
Permits different levels of network access
Broadcast multiple SSID when it is in AP mode
VLAN tagging allows different access levels

Specifications

Hardware Specifications

MCU: Atheros AR7240
Memory: 32 MB
Flash: 8 MB
Physical Interface: 10/100 Fast Ethernet port x 2
One Reset button
LED's Status:
- Power (Status)
- LAN1/LAN2 (10/100Mbps)
- WLAN (Wireless is up)
- 3 x Link Quality (Client Bridge mode)
Power requirements:
- Active Ethernet: (Power over Ethernet) Proprietary PoE design
- Power Adapter: 24VAC / 0.6A

RF Specification

Wireless standard - IEEE802.11 b/g/n

Frequency Band: 2.412 - 2.472GH (b/g/n)
Modulation Technologies: IEEE 802.11b: DBQSK, DQPSK, CCK
IEEE 802.11g: BQSK, QPSK, 16-QAM, 64-QAM
IEEE 802.11n: BQSK, QPSK, 16-QAM, 64-QAM
Operating Channels: 11 channels
Transmit Power
- 802.11b (2.412 - 2.472GHz)
  - 27 [email protected]
  - 27 [email protected]
  - 27 [email protected]
  - 27 [email protected]
- 802.11g (2.412 - 2.472GHz)
- 802.11n (2.412 - 2.472GHz)
  - MCS0 / MCS8 26dBm
  - MCS1 / MCS9 26dBm
  - MCS2 / MCS10 26dBm
  - MCS3 / MCS11 26dBm
  - MCS4 / MCS12 24dBm
  - MCS5 / MCS13 23dBm
  - MCS6 / MCS14 22dBm
  - MCS7 / MCS15 21dBm
Receiver Sensitivity (Typical)
- 802.11b (2.412 - 2.472GHz)
- 802.11g (2.412 - 2.472GHz)
- 802.11n (2.412 - 2.472GHz)
  - MCS0 / MCS8 -95dBm
  - MCS1 / MCS9 -92dBm
  - MCS2 / MCS10 -87dBm
  - MCS3 / MCS11 -85dBm
  - MCS4 / MCS12 -80dBm
  - MCS5 / MCS13 -79dBm
  - MCS6 / MCS14 -74dBm
  - MCS7 / MCS15 -73dBm

Features

Antenna: Internal Antenna with Vertical/Horinzontal dual polarity
Antenna gain: 10 dBi
Frequency Band Range: 2.4 GHz - 2.5 GHz
Horizontal Beam width: 37°
Vertical Beam width: 73°
Antenna Polarity: Dual-Polarized: Vertical/Horinzontal
External antenna connector: N/A

Software Features

Topology: Infrastructure
Protocol: IEEE802.3, 802.3U, 802.11 b/g/n (2.4 GHz)
Operation mode: Client Bridge/Access Point/WDS bridge/Client Router
Service: DHCP server/client
VPN: VPN Pass-through
Networking: PPPoE, PPTP
Narrow bandwidth: Selectable 5MHz/10MHz/20MHz/40MHz

Management

Firmware upgrade: Reset & Backup, Ping & Trace Route
MIB: MIB I, MIB II(RFC1213), Private MIB
SNMP: SNMP v1, v2c
Security:
- WEP Encryption-64/128/152 bit
- WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
- WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
Hide SSID in beacons
MAC address filtering, up to 50 field
Wireless STA (Client) connected list
QoS: WMM (Wi-Fi Multimedia)

Environmental & Physical

Temperature Range
- Operating: -20°C to 70°C (-4°F to 158°F)
- Storage: -30°C to 80°C (-22°F to 176°F)
Humidity (non-condensing): 0%~90% typical
Dimensions: Length: 10.24” (260mm) x Width: 3.31” (84mm) x Height: 2.17” (55mm)
Weight: 0.9 lb
Certifications: FCC, CE, IC

Accessories - Select From drop down options at top of page.

	POE-12TO24V Converter to enable you to run hardware such as many of our outdoor bridging kits etc. which need 24V, from normal 12V batteries.
	WLMNT 20" J Pole + fixed Wall mount: this kit is to convert any pole mount antenna to wall mount BUT not suitable for the grid antenna due to their large size and weight.
	WLMNT-30MMCLIP Used when trying to mount outdoor products to 1" diameter poles (i.e. our WLMNT pole).
	POE-CARSOCKET-50CM To allow you to take DC power from a battery, for example, and present it as a car/DC cigarette lighter socket. Comes with 50cm cable terminated by colour coded 4.8mm receptacles. Maximum current 5 amps.
	POE-12V7AHLEADACID 12V 7Ah sealed lead acid battery (please do not order this product for shipping outside of of mainland UK)

Specifications Tab

by Farid Ratni Excellent Service and excellent product Thank you See full review 5 of 5 Stars!

Date Added: Friday 30 November, 2012

Displaying 1 to 1 (of 1 reviews)

Result Pages: 1

Questions Tab

EnGenius ENH-200 2.4GHz Long Range 11n Outdoor Wireless Client Bridge & Access Point

EnGenius ENH200 2.4GHz Long Range 150Mbps 11n Outdoor Wireless Client Bridge & Access Point

Be Notified