EnGenius EnTurbo 11ac Wave 2 Compact Wireless Indoor Access Point (EAP1250)
The EnGenius EAP1250's powerful onboard Qualcomm® 717 MHz quad-core processors turbocharge wireless performance and efficiency with up to 30% faster throughput compared to 802.11ac Wave 1 3x3 access points. Combined with new 802.11ac technology, EnTurbo APs maximise speed and performance, support greater user device capacity and enhanced connection reliability.
EnGenius EAP1250 Key Features
- Quad-Core CPU, 717 MHz Turbo Engine
- 11ac Wave 2 Wireless Speeds to 867 Mbps (5 GHz); to 400 Mbps (2.4 GHz)
- Up to 30% Faster Throughput Over 11ac Wave 1 3x3 Aps
- Ceiling-Mount, Integrated or Detachable High-Gain Antennas
- Compact, Sleek, Stylish Design
- MU-MIMO Improves Performance & Device Capacities
- Beamforming Technology Optimises Signal, Reception & Reliability for Clients
- 802.3af PoE for Easy Placement Where Outlets are Scarce
- Suite of Advanced AP Management & Security Features
- Flexible Operation Modes: AP, WDS & Repeater
- Simple Web-Based AP Monitoring & Management Software
- Stand-Alone or Manage APs via EnGenius Switches or ezMaster™ Software
- Mesh Wireless Support Simplifies Setup, Optimises Signals & Automatic Self-Heals
Indoor Form & Function
EAP1250 boasts a clean white, minimalistic design that stylishly blends into any business or residential environment. Its small, round footprint and extremely low profile makes the EAP1250 easy to discretely place where needed.
Optimise Connectivity With Wireless Mesh
Utilise mesh access point mode for retrofit or new install applications where wire runs are not possible. Mesh’s smart sensing technology adds devices quickly, optimizes routes between APs, and automatically self-heals the network in the event an AP should ever lose connection.
Far-Reaching Wireless Blankets Coverage
Wide reaching, detachable 360-degree antennas minimize interference for blanketed coverage through floors, ceilings and walls to provide far-reaching reliable connectivity.
Reliable Connectivity & Network Protection
Configure multiple APs to ensure seamless and reliable connectivity, when they move around the network, with standardbased roaming. Quickly detect and avoid network threats through a suite of advanced security features including Guest Networks and email alerts.
Automatic Band Selection
Efficiently steer dual-band client devices to the optimal, less congested frequency band. While the Tri-band AP also routes dedicated 2.4 and 5 GHz devices directly to the respective bands ensuring the fastest bandwidth for all devices.
Flexible Power Options
Connect and power the EnTurbo Indoor APs via their Gigabit 802.3af Power-over-Ethernet ports for discrete placement in locations where power outlets are limited or unavailable, such as ceilings, hallways, rafters and attics. Place the APs up to 328 feet from a PoE-compliant switch or PoE adapter.
EnGenius EAP1250 Technical Specifications
General
- Standards: 802.11a/b/g/n/ac Wave 2
- Frequency: 2.4 GHz & 5 GHz
- 2.4 GHz Max. Data Rate: 400 Mbps
- 5 GHz Max. Data Rate: 867 Mbps
- Radio Chains/Streams: 2 x 2:2
- RF Output Power (2.4 GHz): 23 dBm
- RF Output Power (5 GHz): 23 dBm
- Ethernet Ports: 1 x Gigabit PoE
- Power-Over-Ethernet: 802.3af
- Power Consumption (Peak): 9W
- Integrated Antenna:
- 2 x 5 dBi (2.4 GHz)
- 2 x 5 dBi (5 GHz)
Standards
- IEEE 802.11b/g/n on 2.4 GHz IEEE802.11a/n/ac on 5 GHz
Processor
- Qualcomm® 717 MHz Quad-Core CPU 4x ARM Cortex §
Antenna
- 4 x 5 dBi Omni-Directional Integrated
Physical Interface
- 10/100/1000 Gigabit Ethernet Port
- DC Jack
- Reset Button
- Kensington Security Slot
LED Indicators
- Power (Green)
- Ready to Config (Yellow)
- Internet Connectio (Blue)
- Internet Disconnection (Red)
Power Source
- Power-over-Ethernet: 802.3af Input
- IEEE 802.11e Compliant Source
- 12VDC/1A Power Adapter
Maximum Power Consumption
Surge Protection
Wireless & Radio Specifications
- Dual-Radio Concurrent 2.4 GHz & 5 GHz
Operation Modes
- Access Point Mode (AP mode)
- WDS: WDS AP, WDS Bridge
- Access Point
Frequency Radio
- 2.4 GHz: 2400 MHz~2472 MHz
- 5 GHz: 5150 MHz~5250 MHz, 5250 MHz~5350 MHz, 5470 MHz~5725 MHz, 5725 MHz~5850 MHz
Transmit Power
- 2.4 GHz: 23 dBm
- 5 GHz: 23 dBm
Tx Beamforming (TxBF)
Radio Chains/Spatial Stream
SU-MIMO
- 2.4 GHz - Two (2) Spatial Stream SU-MIMO up to 400 Mbps to individual 2x2 VHT40 client devices (300 Mbps for HT40 802.11n client devices)
- 5 GHz - Two (2) Spatial Stream SU-MIMO up to 867 Mbps to individual 2x2 VHT40 client devices
MU-MIMO
- Two (2) Spatial Streams MU-MIMO up to 867 Mbps to two (2) MU-MIMO capable wireless devices simultaneously
Supported Data Rates (Mbps)
- 2.4 GHz: Max 400
- 5 GHz: Max 867
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 36, 48, 54
- 802.11n: 6.5 to 400 Mbps (MCS0 to MCS15)
- 802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2)
Supported Radio Technologies
- 802.11b: Direct-Sequence Spread Spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
- 802.11n/ac: 2x2 MIMO with 2 Streams
Channelisation
- 802.11ac Supports Very High Throughput (VHT) VHT 20/40/80 MHz
- 802.11n Supports High Throughput (HT)—HT 20/40 MHz
- 802.11n Supports Very High Throughput (VHT) Under the 2.4 GHz Radio—VHT 40 MHz (256-QAM)
- 802.11n/ac Packet Aggregation: AMPDU, ASPDU
Supported Modulation
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
- 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Management Multiple BSSID
- Supports 16 SSIDs (8 SSIDs per Band)
VLAN Tagging
- Supports 802.1q SSID-to-VLAN Tagging
- Cross-Band VLAN Pass-Through
- Management VLAN
Spanning Tree
- Supports 802.1d Spanning Tree Protocol
QoS (Quality of Service)
- Complaint With IEEE 802.11e Standard
- WMM
SNMP
MIB
Management Features Deployment Options
- Stand-Alone (Individually Managed)
- Managed Mode (w/ezMaster & Neutron Switch)
Stand-Alone Management Features
- Auto Channel Selection
- Auto Transmit Power
- Wireless STA (Client) Connected List
- Guest Network
- Fast Roaming (802.11k & 802.11r)
- Pre-Authentication (802.11i, 802.11x)
- PMK Caching (802.11i)
- RSSI Threshold
- Band Steering
- Traffic Shaping
- VLANs for Access Point – Multiple SSIDs
- Backup/Restore Settings
- Auto Reboot
- E-Mail Alert
- Site Survey
- Save Configuration as Default
- Band Steering:
- Prefer 5 GHz
- Force 5 GHz
- Band Balance
Control Features
- Managed Mode (w/ezMaster/EnSky Switch)
- Distance Control (ACK Timeout)
- Multicast Supported
- WiFi Scheduler
- Client Traffic Status
- RADIUS Accounting (802.1x)
- Power Save Mode (U-APSD Support)
- CLI Support
- HTTPS
Wireless Security
- WEP Encryption 64/128/152 bit
- WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES)
- Hide SSID in Beacons
- MAC Address Filtering, Up to 32 MACs per SSID
- Wireless STA (Client) Connected List
- SSH Tunnel
- Client Isolation
