Availability : 1 - 2 weeks from order
Firetide HotPoint 4100 Indoor WiFi Wireless Access Point
Firetide HotPoint wireless access points deliver a modular access solution for large scale, indoor and outdoor wireless mesh networks. Modular design enables full network and software integration of the access points with a Firetide wireless mesh network while at the same time permitting independent physical placement of the hardware to provide optimal accessibility for Wi-Fi clients.
Seamless Outdoor and Indoor Operation Outdoor HotPoint 4600 access points have rugged NEMA 4X/IP67-rated cast aluminum enclosures and have one weatherproof connector for attaching to a Firetide wireless mesh node or a conventional Ethernet port. These units support high gain antennas and can receive power directly from a connected mesh node eliminating the need for an external power supply.
Indoor HotPoint 4500 access points provide wireless access within buildings and moving vehicles. Each indoor access point has a UL2043 plenum-rated enclosure and an RJ-45 connector for attaching to a Firetide wireless mesh node or a conventional Ethernet port.
Access On or Off the Mesh
HotPoint wireless access points can be mounted to a Firetide mesh node to provide Wi-Fi access to any indoor or outdoor location without the need for backhaul cabling. HotPoint access points can also connect directly to a conventional wired infrastructure eliminating the need to install a mesh node in locations where wired connectivity is readily available.
Modularity for Flexible Placement
Unlike conventional mesh networks that combine mesh backhaul and Wi-Fi access in the same enclosure, Firetide mesh nodes and access points can be physically separated allowing system integrators to optimize RF separately for both the mesh backhaul as well as client access.
For example, in a multi-building mesh network, mesh nodes should be placed in areas that enable the best connectivity between buildings which is typically at higher locations. However the best locations for the access points tend to be lower to provide the best connectivity for Wi-Fi clients inside a building. Because the access points and mesh nodes are kept in separate enclosures, they can be independently positioned for optimal RF connectivity.
Single-point Network Management for Mesh and Access
Whether connected directly to a Firetide wireless mesh network or to a wired infrastructure, the HotPoint access points are fully integrated and managed with the same HotView software used to manage Firetide mesh nodes. HotView provides remote management from a centralized location and users can manage all mesh and access traffic from a single console.
Advanced Security and Performance Features
HotPoint access points operate in the 2.4 GHz band and feature WPA2 and WEP encryption, up to 16 SSIDs, industry compliant QoS, and durable enclosures. High-power radios with up to 400 mW provide extended reach and outstanding penetration.
Designed for Hot Spots
Layered service levels can be enabled through Virtual APs (VAPs) and Virtual AP Groups. Each HotPoint AP supports up to 16 VAPs, creating different logical networks with varying levels of security, access, and performance. Additional Hot Spot features include user-based rate limiting and intracell blocking.
Firetide HotPoint 4100 Indoor Wi-Fi Wireless Access Point Technical Specifications
Wireless interface
- IEEE 802.11b/g
- Frequency range: 2.400 – 2.484 GHz
- Transmit power up to 400 mW
- Manual Transmit Power Control
- 802.11d (Auto Channel Select)
Typical RX sensitivity:
- 2.4 GHz, DSSS
- 1 Mbps: -96 dBm
- 11 Mbps: -90 dBm
- 2.4 GHz, OFDM
- 6 Mbps: -93 dBm
- 54 Mbps: -74 dBm
Media Access Protocol
- CSMA/CA with ACK
- Range up to 1000 meters depending on client configuration and environment
Networking
- Up to 4 SSIDs & 4 VLANs per HotPoint
- DHCP client/server, separate DHCP range per SSID
Security, Authentication and Encryption
- 802.11i, WPA2
- 40 bit, 104 bit WEP keys
- 128 bit, 256 bit AES keys
- 802.1x, RADIUS authentication
- SSID suppression
- Firewall
- MAC access control
- NAT
Seamless L2/L3 Mobility
- Supported with WLAN/Mobility Controller
Rich Enterprise Ready Features
- Auto Channel allocation
- Coverage Gap Detection
Management and Configuration
- Integrated mesh and access management
- Multiple user interface options:
Centralized management via HotView or HotView Pro
- Built-in web-based management
- Remote firmware upgrade
- Physical AP grouping
Hot Spot Services
- Virtual AP Grouping in controller mode
- User-based rate limiting
- Intercell/intracell blocking
Enclosure
- Plastic enclosure
- Two RP-SMA antenna connectors
- One DC power connector
- One Ethernet connector
- System indicator LEDs (power, status)
- Weight: 10 oz (280 g)
- Dimensions: 6” X 4.75” x 1” (150 X 120 X 25 mm)
Power
- DC Input: 9 – 15 VDC 0.7 A at 12 VDC
- AC power adapter: 100 – 240 VAC, 50/60 Hz input; 12 VDC, 1.5 A rated output
Environmental Specifications
- Operating temperature: 0°C to +60°C
- Storage temperature: -40°C to +70°C
- Humidity (non-condensing): 10% to 90%
- Storage humidity (non-condensing): 5% to 95%
- Maximum altitude 15,000 feet (4,572 meters)
Included Accessories
- AC power adapter with interchangeable plug inserts (US, Europe, UK, Australia)
- Antennas: one pair of 5 dBi, 2.4 GHz
