Availability: In Stock

Funkwerk WLAN Outdoor Bridgelink Bundle Point-to-Point, Wireless Bridge Kit

The WLAN Outdoor Bridge Link Bundle "Out-of-the-Box" is designed for wireless bridging of radio links in outdoor environments. The bundle contains all required components to setup a radio link by using the new 802.11n technology with two Funkwerk WI1065n devices, which can be mounted directly at the antenna pole. The WI1065n access points are water protected and allow operation in temperature ranges between -25° C and +65° C. The bundle also contains two PoE adapters, which enables power supply over network cable and the dual polarization antennas which can transmit the data over two streams, which leads to higher performance of the system.

The follow components contained are:

• 2 x Funkwerk WI1065n (Outdoor Usage)
• 2 x ANT-N-20-5G Dual Polarization
• 4 x 0.5 m RTNC plug N plug LMR400
• 4 x Surge Arrester N plug N jack
• 2 x Pole mounting for WI-65 Series
• 2 x PoE Injector

In the case of free line of sight, the following results are expected by using the following configuration:

Hints to improve the operating distance:

• Use shorter cables, to reduce the cable lost
• Use a antenna with higher gain
• Select 20 MHz bandwidth instead 40 MHz, or use only one stream

Funkwerk WI1065n, Indoor/Outdoor WiFi, Single Dual Band Radio Access Point

• 802.11n outdoor access point for mounting directly on the mast
• Dual band 2.4 / 5 GHz, optionally with either one or two wireless modules
• Operation permissible with up to 4000 mW transmission power
• VPN IPsec hardware encryption
• Power supply optionally via 24V DC or PoE
• WAN optionally via Ethernet or optical fiber cable
• Extended temperature range -25°C to +65°C
• Operation as fat AP or as controller based AP via Funkwerk WLAN controller

For more information on the AP unit, please refer to our Funkwerk WI1065n Indoor Access Point product page.

Specifications Tab

Questions Tab