HPE OfficeConnect 1820 8G PoE+ 65W Switch (J9982A)
The HPE OfficeConnect 1820 Switch is a basic, smart-managed, fixed-configuration Gigabit Ethernet Layer 2 switches designed for small businesses looking for key features in an easy-to-administer solution. The series is part of the OfficeConnect portfolio of Hewlett Packard Enterprise small business networking products.
HPE OfficeConnect 1820 Switch Key Features
- Customised operation using intuitive Web interface
- Flexible deployment options including wall, under table, and desktop mounting
- 24- and 48-port models include SFP ports
- 8-, 24- and 48-port non-PoE+ models are fanless for quiet operation
- Limited Lifetime Warranty
The series consists of six switches including 8-, 24- and 48-port Gigabit Ethernet switches and 8-, 24-, and 48-port Gigabit PoE+ models each providing non-blocking Gigabit per port performance. Some models include SFP ports for fiber connectivity and the 8-, 24-, and 48-port non PoE+ models are fanless, making them ideal for office deployments. All HPE OfficeConnect 1820 Switches support flexible installation options, including mounting on wall, under table, or on desktop. The 8-port Gigabit Ethernet model can be powered by an upstream Power over Ethernet (PoE) switch for environments where no line power is available.
These Gigabit switches are plug-and-play out of the box, yet network operation can be fine-tuned through features available from a simple Web browser-based GUI, if necessary. Customisable features include VLANs, Rapid Spanning Tree, IGMP Snooping, link aggregation trunking, and DSCP QoS policies. All models include the latest energy-saving capabilities, including Energy Efficient Ethernet (EEE) and idle-port power down. HPE OfficeConnect 1820 Switch Series includes a Limited Lifetime Warranty.
HPE OfficeConnect 1820 Technical Specifications
I/O Ports and Slots
- 4 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 4 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
Physical Characteristics
- Dimensions: 10(w) x 6.28(d) x 1.73(h) in (25.4 x 15.95 x 4.39 cm) (1U height)
- Weight: 2.01 lb (0.91 kg)
Memory and Processor
- ARM Cortex-A9 @ 400 MHz, 128 MB SRAM; Packet buffer size: 1.5 MB, 16 MB flash
Performance:
- 100 Mb Latency: < 7 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 2.3 µs (LIFO 64-byte packets)
- Throughput: up to 11.9 Mpps (64-byte packets)
- Switching Capacity: 16 Gbps
- MAC Address table size: 8000 entries
Reliability:
Environment:
- Operating temperature: 32°F to 104°F (0°C to 40°C)
- Operating relative humidity: 15% to 95% @ 104°F (40°C)
- Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
- Nonoperating/ Storage relative humidity: 15% to 95% @ 140°F (60°C)
- Altitude: up to 9,842 ft (3 km)
- Acoustic: Power: 0 dB no fan
Electrical characteristics
- Frequency: 50/60 Hz
- AC Voltage: 100 - 240 VAC
- Current: . 9 A
- Maximum power rating: 83.9 W
- Idle Power: 12.6 W
- PoE Power: 65 W PoE+
- Notes: Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the power supplied by the internal power supply, it is dependent on the type and quantity of power supplies and may be supplemented with the use of an External Power Supply (EPS).
Safety
- UL 60950-1; EN 60825; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1
Emissions
- FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Immunity
- Generic: EN 55024, CISPR 24
- EN: EN 55024, CISPR 24
- ESD: IEC 61000-4-2
- Radiated: IEC 61000-4-3
- EFT/ Burst: IEC 61000-4-4
- Surge: IEC 61000-4-5
- Conducted: IEC 61000-4-6
- Power frequency magnetic field: IEC 61000-4-8
- Voltage dips and interruptions:IEC 61000-4-11
- Harmonics: EN 61000-3-2, IEC 61000-3-2
- Flicker: EN 61000-3-3, IEC 61000-3-3
Management
Notes
- Use only supported genuine HPE mini-GBICs with your switch.
Services
- Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services fordetails on the service-level descriptions and product numbers. For details about services and responsetimes in your area, please contact your local Hewlett Packard Enterprise sales office.
