MOBILE

• Mobile module
• 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
• Status
• Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
• SMS
• SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
• USSD
• Supports sending and reading Unstructured Supplementary Service Data messages
• Black/White list
• Operator black/white list
• Multiple PDN
• Possibility to use different PDNs for multiple network access and services
• Band management
• Band lock, Used band status display
• APN
• Auto APN
• Bridge
• Direct connection (bridge) between mobile ISP and device on LAN
• Passthrough
• Router assigns its mobile WAN IP address to another device on LAN

ETHERNET

• LAN
• 1 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

NETWORK

• Routing
  • Static routing
• Network protocols
  • TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
• VoIP passthrough support
  • H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
• Connection monitoring
  • Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
• Firewall
  • Port forward, traffic rules, custom rules
• DHCP
  • Static and dynamic IP allocation, DHCP Relay, Relayd
• QoS / Smart Queue Management (SQM)
  • Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
• DDNS
  • Supported >25 service providers, others can be configured manually
• Network backup
  • VRRP, Wired options, each of which can be used as an automatic Failover, Mobile
• Load balancing
  • Balance Internet traffic over multiple WAN connections
• SSHFS
  • Possibility to mount remote file system via SSH protocol

SECURITY

• Authentication
  • Pre-shared key, digital certificates, X.509 certificates
• Firewall
  • Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
• Attack prevention
  • DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
• VLAN
  • Port and tag based VLAN separation
• Mobile quota control
  • Custom data limits for SIM card
• WEB filter
  • Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
• Access control
  • Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

• OpenVPN
  • Multiple clients and a server can run simultaneously, 12 encryption methods
• OpenVPN Encryption
  • DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
• IPsec
  • IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
• GRE
  • GRE tunnel
• PPTP, L2TP
  • Client/Server instances can run simultaneously, L2TPv3 support
• Stunnel
  • Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
• DMVPN
  • Method of building scalable IPsec VPNs
• SSTP
  • SSTP client instance support
• ZeroTier
  • ZeroTier VPN client support
• WireGuard
  • WireGuard VPN client and server support

MODBUS TCP SLAVE

• ID range
  • Respond to one ID in range [1;255] or any
• Allow Remote Access
  • Allow access through WAN
• Custom registers
  • MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

MODBUS TCP MASTER

• Supported functions
  • 01, 02, 03, 04, 05, 06, 15, 16
• Supported data formats
  • 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

MBUS

• Protocol Support
  • The M-Bus interface can support up to 250 slave devices and can power up to 6 slave devices.

MODBUS DATA TO SERVER

• Protocol
  • HTTP(S), MQTT, Azure MQTT

MQTT GATEWAY

• MQTT Gateway
  • Allows sending commands and receiving data from MODBUS Master through MQTT broker

DNP3

• Supported modes
  • TCP Master, DNP3 Outstation

MONITORING & MANAGEMENT

• WEB UI
  • HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
• FOTA
  • Firmware update from server, automatic notification
• SSH
  • SSH (v1, v2)
• SMS
  • SMS status, SMS configuration, send/read SMS via HTTP POST/GET
• Call
  • Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer
• TR-069
  • OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
• MQTT
  • MQTT Broker, MQTT publisher
• SNMP
  • SNMP (v1, v2, v3), SNMP Trap
• JSON-RPC
  • Management API over HTTP/HTTPS
• MODBUS
  • MODBUS TCP status/control
• RMS
  • Teltonika Remote Management System (RMS)

IOT PLATFORMS

• Cloud of Things
  • Allows monitoring of: Device data, Mobile data, Network info, Availability
• ThingWorx
  • Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
• Cumulocity
  • Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
• Azure IoT Hub
  • Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

SYSTEM CHARACTERISTICS

• CPU: ARM Cortex-A7 1.3 GHz CPU
• RAM: 256 MB. DDR3
• FLASH storage: 512 MB, SPI Flash

FIRMWARE / CONFIGURATION

• WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
• FOTA: Update FW/configuration from server
• RMS: Update FW/configuration for multiple devices at once
• Keep settings: Update FW without losing current configuration

FIRMWARE CUSTOMIZATION

• Operating system: RutOS (OpenWrt based Linux OS)
• Supported languages: Busybox shell, Lua, C, C++
• Development tools: SDK package with build environment provided

INPUT / OUTPUT

• Input:
  • 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
• Output:
  • 1 x Digital Output, Open collector output, max output 30 V, 300 mA
• Events: Email, RMS, SMS
• I/O juggler: Allows to set certain I/O conditions to initiate event

POWER

• Connector: 4-pin industrial DC power socket
• Input voltage range: 12 – 30 VDC
• PoE (passive): Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
• Power consumption: Idle: 3 W, Max: 6 W

PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS, SIM)

• Ethernet: 1 x RJ45 port, 10/100/1000 Mbps
• I/O's: 1 x Digital Input, 1 x Digital Output on 4-pin power connector
• Status LEDs: 3 x connection type status LEDs, 5 x connection strength LEDs, 1x Power LED
• SIM: 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
• Power: 1 x 4 pin power connector
• Antennas: 1 x SMA for LTE
• Reset: Reboot/User default reset/Factory reset button

PHYSICAL SPECIFICATION

• Casing material: Aluminum housing
• Dimensions (W x H x D): 74.5 x 25 x 73 mm
• Weight: 145 g
• Mounting options: DIN rail (can be mounted on two sides), flat surface placement

OPERATING ENVIRONMENT

• Operating temperature: -40 °C to 75 °C
• Operating humidity: 10% to 90% non-condensing
• Ingress Protection Rating: IP30

REGULATORY & TYPE APPROVALS

• Regulatory: CB, CE, UKCA, RoHS, REACH, WEEE

EMI IMMUNITY

• ESD: EN 61000-4-2:2009
• RS: EN 61000-4-3:2006 + A1:2008 + A2:2010
• EFT: EN 61000-4-4:2012

SAFETY

• Standards: IEC 62368-1:2018