Ubiquiti EdgePoint EP-R6 WISP Control Point Layer-3 Router
The Ubiquiti EdgePoint EP-R6 Layer-3 router is an intelligent WISP Control Point with FiberProtect. The EP-R6 is the first application-specific designed WISP control point. It combines the advanced routing capabilities of EdgeMAX with fiber backhaul and versatile powering capabilities.
Ubiquiti EdgePoint - EP-R6 Key Features
- Weatherproof enclosure for outdoor use
- Powerful routing or switching features
- Fiber backhaul capability
Breakthrough in Tower Deployment
The EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI). This greatly improves data signal integrity and consolidates the wired data backhaul to a single fiber cable, run for long-distance connectivity.
Robust Construction
The ruggedised case withstands outdoor conditions, including wind, rain, and snow. The included cable sleeve protects the cables and cable opening. If you prefer, you can swap it out for your own conduit.
Intuitive User Interface
The EdgePoint provides a graphical user interface designed for convenient setup and control. Accessed via a network port and web browser, the user-friendly interface provides intuitive management with a virtual view of the ports, displaying physical connectivity, speed, and status.
All-in-One Design
A single, compact controller efficiently eliminates clutter, expensive cabinets, extraneous installations, and excessive maintenance.
Ubiquiti EdgePoint EP-R6 Technical Specifications
Overview
- Dimensions: 188.6 x 177.1 x 49.8 mm (7.43 x 6.97 x 1.96")
- Weight: 605g (1.33 lb)
- Enclosure Characteristics: Polycarbonate with UV Resistance
- Max. Power Consumption: 7W (Excludes PoE Output)
- Power Input:
- (1) DC Terminal Block or (1) RJ45 (eth0) (Self-Correcting Polarity Protection on DC Terminal Block Only, Diode ORed Protection on All Power Inputs)
- Power Supply: Min. 24V / 0.3A (Excludes PoE Output Power)
- VDC Input: 24V, 3A
- Passive PoE Input: (1) 24V / 1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, eth0 (Do NOT Configure eth0 in PoE Output Mode if You Are Using a PoE Input Power Source.)
- Passive PoE Output: (5) 24V / 0.7A, 2-Pair (+4, 5; -7, 8) Passive PoE, eth0 to eth4
- Power Monitoring:
- (1) DC Terminal Block, Input Power
- (1) RJ45, eth0, Input Power
- Supported Voltage Range: 26 to 16VDC
- Button: Reset
- LEDs:
- System: Power
- eth0 to eth4: Speed/Link/Activity, PoE
- eth5/SFP: Speed/Link/Activity
- Ports:
- Data Ports: (5) 10/100/1000 RJ45 Ports, (1) 1 Gbps SFP Port
- Processor: Dual-Core 880 MHz, MIPS1004Kc
- System Memory: 256 MB DDR3-1600 RAM
- Code Storage: 256 MB NAND
- Certifications: CE, FCC, IC
- Pole Mount: Yes
- Wind Loading: 46 N @ 200 km/h (10.34 lbf @ 125 mph)
- Wind Survivability: 200 km/h (125 mph)
- Operating Temperature: -40 to 65° C (-40 to 149° F)
- Operating Humidity: 10 to 90% Noncondensing
