Ubiquiti UniFi Access Reader G2 Professional Black (UA-G2-Pro-Black)
The Ubiquiti UA-G2-Pro-Black stands at the forefront of access control solutions, blending convenience, security, and adaptability. Effortlessly unlock doors through NFC cards or the UniFi Identity mobile app, providing users with flexible access options. Its integrated doorbell feature activates an intercom system displaying a video feed of the visitor, ensuring clear communication and meeting ADA visibility standards. Enhanced security is achieved with PIN unlocking on the screen, adding an additional layer of authentication.
Seamless integration is facilitated by connecting the UniFi Access Reader G2 Pro to the UniFi Access Hub via Power over Ethernet (PoE), eliminating the need for extra power supplies and simplifying installation. Rain-resistant with an IP55 rating and operational in temperatures ranging from -10 to 40°C, this reader is suitable for both indoor and outdoor use.
Ubiquiti UniFi Access Reader G2 Professional Black Key Features:
- Unlock using an NFC card or UniFi Identity mobile app
- Doorbell for unlock with video of visitor and two-way intercom
- Video works at ADA-compliant mounting height
- PIN unlocking on the screen
- Connects to UniFi Access Hub using PoE
- IP55 rain resistance (-10 to 45° C)
Embark on a new era of access control with the Ubiquiti UniFi Access Reader G2 Pro. Boasting user-friendly functionalities like NFC card and mobile app unlocking, video intercom, PIN authentication, and seamless integration, it emerges as the perfect solution for any facility. Its robust build and weather-resistant design ensure dependable access management across diverse environments.
Ubiquiti UniFi Access Reader G2 Professional Black Technical Specifications
Mechanical
- Dimensions: 160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6")
- Weight: 136 g (4.8 oz)
- Enclosure material: Polycarbonate, glass
- Mount material: Aluminum alloy
- Mounting: Wall, gang box
- Weatherproofing: IP55
Hardware
- Networking interface: (1) GbE RJ45 port
- Connectivity: BLE 4.2, NFC
- Power method: PoE, UL 294 Power-limited Class 2 PSU, UL 60950-1/62368-1 LPS/PS2 PSU
- Supported voltage range: 48V DC
- Max. power consumption: 6W
- ESD/EMP protection: Air: ±15kV, contact: ±8kV
- Sensor: Proximity sensor
- Camera: 4000 x 3000, 12 MP, 30 FPS
- Microphone: Yes
- Speaker: (1) 4 ohm, 1.5W
- LEDs: R/G/B/W
- Flash
- Button: (1) Factory-reset
- NFC frequency: 13.56 MHz
- NFC read range: < 30 mm
- NFC standards: ISO 14443A, 14443B, 15693
- NFC technology: NFC Tag 1,2,3,4,5, MIFARE Classic, MIFAREPlus, MIFARE Ultralight, MIFARE DESFire
Operating environment
- Outdoor use
- Ambient operating temperature: Device: -30 to 45° C (-22 to 113° F), Display: -10 to 45° C (14 to 113° F)
- Ambient operating humidity: 5 to 90% noncondensing
Software information
UL 294 information
- UL 294 level: Destructive attack: Level I, Line security: Level I, Endurance: Level I, Standby power: Level I
- UL 294 statement: Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirements
- Cable 5e cabling is the minimum performance category recommended. The performance category utilised should match the transmission speed required at the installation site.
- The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm2) for patch cords; 24 AWG (0.21 mm2) for horizontal or riser cable.
CAN/ULC-60839-11-1 Grade
Certifications
- CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level
- UA-G2-Pro/UA-G2-Pro-Black, V02
LED
- System: Steady blue: Adopted/device is ready, Steady white: Pending adoption, Blinking white/blue: Upgrading firmware, Strobing red: Emergency lockdown
Software
- Management application: UniFi Access: Version 1.5.9 and later
