Ubiquiti UA-SK-Gate Technical Specifications

• UA-Hub-Gate

  • Mechanical

    • Dimensions: 175 x 126 x 26 mm (6.9 x 5 x 1")
    • Weight: 460 g (1 lb)
    • Enclosure material: Polycarbonate
    • Mounting: Din-rail (Included)

  • Hardware

    • Networking interface: (5) 10/100/1000 Base-T
    • Power method: PoE++
    • Max. power consumption: Without PoE output: 22W, With PoE output: 50W
    • PoE input: 50V DC, 1A
    • PoE output: PoE passthrough, (4) PoE, 50V DC, Max. 28W
    • Button: (1) Factory-reset
    • Digital input: Gate exit request, gate position, side door exit request, side door position, emergency
    • Dry output relay: (2) Operator: rated 30V DC, up to 1A, (1) Aux: rated 30V DC, up to 1A
    • Powered output relay: Side door lock: 12V DC, up to 1A
    • Operating environment: Indoor use only with device itself, Outdoor use with waterproof junction box
    • Ambient operating temperature: -30 to 60° C (-22 to 104° F)
    • Ambient operating humidity: 5 to 90% noncondensing
    • Certifications: CE, FCC, IC

  • LEDs

    • PoE in: Steady white: Pending adoption, Steady blue: Adopted, device is ready, Blinking white/blue: Upgrading firmware
    • PoE out: Off: Not connected or no data link, Steady white: Connected and data link on
    • Input terminals: Off: No wire, Steady white: Wire connected, Blinking white: Active signal
    • Output relays: Off: No wire, Steady white: Wire connected, Blinking white: Relay triggered

• UA-Intercom

  • Mechanical

    • Dimensions: 324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1")
    • Weight: Device: 965 g (2.1 lb), Bracket: 445 g (1 lb)
    • Enclosure material: Aluminum alloy, UV-stabilized polycarbonate, glass
    • Mount material: Powder-coated stainless steel
    • Mounting: Wall mount, adapter to the gooseneck pedestal (Included), Surface angle mount, flush mount (Optional), Sunshield kit (Optional)
    • Weatherproofing: IP65

  • Hardware

    • Networking interface: (1) GbE RJ45 port
    • Connectivity: Bluetooth 4.2, NFC
    • Power method: PoE, UL 294 Power-limited Class 2 PSU, UL 60950-1/62368-1 LPS/PS2 PSU
    • Supported voltage range: 48V DC
    • Max. power consumption: 13W
    • ESD/EMP protection: Air: ±15kV, contact: ±8kV
    • Sensors: Proximity sensor, ALS sensor
    • Camera: 3264 x 2448, 8 MP, H: 79.4°, V: 97.5°, D: 118.2°
    • Display: 177 mm (7") diagonal, Resolution: 1024 x 600 (16:9), Display luminance: Max. 1000 nits (typical)
    • Touch screen technology: Capacitive multi-touch
    • Microphone: Yes
    • Speaker: (1) 4 ohm, 2W
    • LEDs: (1) LCM low temperature indicator: orange (LCM turned off when it’s below -25° C but the system functions normally), (1) LED floodlight, (13) Keypad LED backlight
    • Button: (1) Factory-reset
    • NFC frequency: 13.56 MHz
    • NFC read range: < 30 mm
    • NFC standards: ISO 14443A, 14443B, 15693
    • NFC technology: NFC Tag 1,2,3,4,5, MIFARE Classic, MIFARE Plus, MIFARE Ultralight, MIFARE DESFire
    • Ambient operating temperature: Device: -30 to 60° C (-22 to 140° F), Display:* -25 to 60° C (-13 to 140° F)
    • *The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v 1.0.66)
    • Operating environment: Outdoor use
    • Ambient operating humidity: 5 to 90% noncondensing

  • Software information

    • The software version of a product can be checked at https://unifi.ui.com

  • UL 294 level

    • Destructive attack: Level I
    • Line security: Level I
    • Endurance: Level I
    • Standby power: Level I

  • UL 294 statement

    • Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
    • The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

  • PoE cabling requirements

    • Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
    • The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm²) for patch cords; 24 AWG (0.21 mm²) for horizontal or riser cable.

  • CAN/ULC-60839-11-1 Grade

    • Grade assignment: I

  • Certifications

    • CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
    • Document number, and issue date and/or revision level: UA-Intercom, V01

• UACC-Extender-2Wire-PoE-Tx/Rx

  • Mechanical

    • Dimensions: 40 x 105 x 25 mm (1.6 x 4.1 x 1")
    • Weight: PoE in: 77 g (2.7 oz), PoE out: 79 g (2.8 oz)
    • Enclosure material: Polycarbonate
    • Mounting material: Polycarbonate

  • Hardware

    • Networking interface: (1) 10/100 MbE, (1) Homeplug AV
    • Power method: PoE++
    • Max. power consumption: 3W (Without PoE output)
    • PoE input: (1) PoE++, 50V DC, Max. 1.2A
    • PoE output: (1) PoE+, 48V DC, 0.72A
    • ESD/EMP protection: Air: ±8kV, contact: ±4kV
    • LED: White
    • Ambient operating temperature: -10 to 40° C (14 to 104° F)
    • Ambient operating humidity: 5 to 95% noncondensing
    • Certifications: CE, FCC, IC

• U-PoE++

  • Specifications

    • Model: U-PoE++
    • Dimensions: 106 x 63 x 34 mm (4.2 x 2.5 x 1.3")
    • Weight: 210 g (7.4 oz)
    • Output voltage: 48V DC @ 1.25A
    • LAN activity indicator: No
    • Gigabit LAN port: Yes
    • Remote reset capability: No
    • Reset button: No
    • Rated voltage: 100—240V AC @ 50/60Hz
    • Input current: 1.3A @ 120V AC, 0.75A @ 230V AC
    • Inrush current: <100A peak @ 120V AC, <200A peak @ 230V AC
    • Efficiency: 85+%
    • Output ripple: 1% max.
    • Switching frequency: 65 kHz
    • Line regulation: ≤ 1%
    • Load regulation: ≤ 3%
    • 2-pair powering: No
    • 4-pair powering: Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-)
    • AC connector: IEC-320 C6
    • Data In / PoE: RJ45 shielded socket
    • Surge protection: Difference and common mode
    • Clamping protection: 11V data, 60V power
    • Max. surge discharge: 1500A (8/20 μs) power
    • Peak pulse current: 36A (10/1000 μs) data
    • Shunt capacitance: <5 pF data
    • Response time: <1 ns
    • Power method: Universal AC input, 100—240V AC, 50/60 Hz
    • Power supply: AC/DC
    • Supported voltage range: 100—240V AC
    • Max. PoE+ wattage per port by PSE: 60W
    • Ambient operating temperature: 0 to 40° C (32 to 104° F)
    • Storage temperature: -30 to 70°C (-22 to 158° F)
    • Ambient operating humidity: 10 to 95% noncondensing
    • Certifications: CE, FCC, IC, UL, UKCA, KC, CCC, KC, RoHS