Radio Specifications—802.11a

• 5.150–5.950 GHz Operating Frequency
• Orthogonal Frequency Division Multiplexing (OFDM) Modulation
• Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback

Radio Specifications—802.11b

• 2.4–2.5GHz Operating Frequency
• Direct-Sequence Spread-Spectrum (DSSS) Modulation
• Rates (Mbps): 11, 5.5, 2, 1 w/auto fallback

Radio Specifications—802.11g

• 2.4–2.5 GHz Operating Frequency
• Orthogonal Frequency Division Multiplexing (OFDM) Modulation
• 20 dBm (100 mW) Transmit Power
• Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback

Radio Specifications—802.11n

• 2.4–2.5 GHz & 5.150–5.950 GHz Operating Frequency
• 802.11n Modulation
• Rates (Mbps): MCS0–MCS23 (6.5Mbps - 450Mbps)
• 3x3:3 Stream Multiple-In, Multiple-Out (MIMO) Radio
• HT20 High-Throughput (HT) Support (for both 2.4 GHz and 5 GHz)
• A-MPDU and A-MSDU Frame Aggregation

Radio Specifications—802.11ac

• 5.150–5.950 GHz Operating Frequency
• 802.11ac Modulation (256-QAM)
• Rates (Mbps): MCS0–MCS9 (6.5Mbps - 1300Mbps), NSS = 1-3.
• 3x3:3 Stream Multiple-In, Multiple-Out (MIMO) Radio
• VHT20/VHT40/VHT80 support

Mounting

• Desktop
• Wall Mount included as part of AP
• Built-in slot for Kensington type locks
• Ceiling and Wall Mount locking accessory included with AP
• Ceiling Tile flush 15/16” included as part of AP
• Ceiling Tile Recessed 15/16”, 3/8”, 9/16” sold as an accessory
• Ceiling Tile flush 3/8”, 9/16” sold as an accessory
• Suspend Mount sold as an accessory
• Plenum Mount sold as an accessory

Antennas

• 3x Integrated single band, 2.4-2.5 GHz Omni-directional antennas, 6.0 dBi peak gain
• 3x Integrated single band, 5.1-5.8 GHz Omni-directional antennas, 6.0 dBi peak gain

Interfaces

• 2x autosensing 10/100/1000 Base-T Ethernet Ports
• Dual Ethernet ports with backhaul capabilities
• Link Aggregation supported via Ether channel (link aggregation)
• 1x Serial RJ45 port (bits per second: 9600, data bits: 8, parity: none, stop bits: 1, flow control: none)
• USB 2.0 port (Future use)
• 1x Reset Pinhole

Physical

• WxHxD: 7.25” x 7.25” by 1 7/8” tall (plus .25” for the mounting hardware) – so 2.12” (5.4 cm) high total
• Weight: 1.6 lbs (.73 kilograms)

Environmental

• Operating: 0 to 40°C, Storage: -40 to +70°C, Humidity: 95%

Environmental Compliance

• UL 2043

Power Options (sold separately)

• 802.3af (minimum required) and/or 802.3at Power over Ethernet PoE Injector
• 12v DC external power adapter
• Aerohive switch products

Power Specification

• AC/DC power adapter: – Input: 100–240 VAC – Output: 12v/2.0A
• PoE nominal input voltages: 48V, 0.35A, (802.3af) – 48V, 0.625A (802.3at)
• RJ-45 power input pins: Wires 4,5,7,8 or 1,2,3,6
• 802.3af compatible with Cat-5 cable or higher (up to 14.5W draw with full functionality)