Aerohive AP110 802.11n Wireless Access Point

The AP110 is a high-performance, 802.11n, 2x2 MIMO access point with a 10/100/1000 Ethernet port, delivering a data rate of 300Mbps with a single dual-band radio.

The Aerohive AP110 802.11n Wireless Access Point is ideal for deployments where a single radio 802.11a/b/g/n solution is sufficient, such as small retail environments, telecommuters, and micro branches.

Features of Aerohive AP110 802.11n Wireless Access Point

Single radio APs can also be effective in low-capacity environments where the benefits of a second radio are small because there are few clients vying for airtime. The AP110 can operate in either band – 2.4GHz or 5GHz – providing the opportunity to use the less congested 5GHz band if the clients are all 5GHz capable.

Aerohive HiveManager Online Features Comparison Chart

Features & Benefits

Flexible Hardware Platform

• Single radio provides support of 802.11a/n or 802.11b/g/n connections with no degradation in performance
• Automatic or dedicated mesh backup
• Plenum Rated APs for indoor, office environments
• Supports 802.3af PoE or a standard power adapter

Innovative Design

• Low profile design blends well into an office environment
• Feature optimized hardware design
• Low-distraction indicators appear as gently glowing rather than bright blinking lights

HiveOS - Software Features

 All HiveAPs support the feature-rich HiveOS service architecture. HiveOS is an implementation of Aerohive's Cooperative Control Architecture which enables multiple APs to organize into groups or "hives" that share control information enabling functions such as fast layer-2/layer-3 roaming, cooperative RF management, security and mesh networking without requiring a dedicated system controller. The resulting feature-rich capability enables a next generation wireless LAN architecture, called a Cooperative Control Wireless LAN Architecture. This architecture provides the benefits of a controller-based implementation, yet has a lower deployment/ownership cost, is more reliable, more scalable, higher performing and more suitable for today's proliferation of wireless applications than controller-based architectures.

Hardware Assisted Features

Security

•  Trusted Platform Module (TPM)–Hardware-based key storage and encryption
• Wireless privacy & authentication Wi-Fi Certified, WPA and WPA2, 802.11i, WEP, 802.1x, PSK
• Granular user profile-based management defines QoS, mobility policies, and security policies for each user that enters the network
• Encryption: AES:CCMP, TKIP, and RC4 (WEP only)

HW QoS Features

• Marking and policing–WMM (802.11e) for wireless, 802.1p and/or DiffServ
• Wi-Fi Certified WMM
• WMM power save (U-APSD)

Anti-Theft

• Designed to work with Kensington-style locks
• Tamper-proof security screw (with bracket option)

Network Management Solutions

Aerohive's HiveManager NMS is a central management solution for Aerohive HiveAPs. HiveManager supports simple policy creation, firmware upgrades, configuration updates, and centralized monitoring throughout the entire Aerohive deployment, whether building-wide, campus-wide, or global - all from a single console. Because the HiveManager is not actively involved in passing traffic or in making forwarding decisions, it eliminates the traffic bottlenecks and complexities of controller-based solutions, particularly in geographically distributed environments. As a result, control is distributed, while management is centralized. Essentially, the HiveManager solution delivers the benefits of both autonomous APs and controller-based solutions, without the drawbacks of either approach.

Aerohive's HiveManager NMS can be delivered two ways:

• HiveManager Online - a cloud-based management service from Aerohive
• HiveManager VMware virtual appliance - an on-premise VM management solution

Please note, Aerohive HiveManager NMS is not included and available separately.

Specifications Tab

Questions Tab