Hardware features

• High output power Transmit high output power programmable for different country selections
• High Data Rate High speed transmitting rate up to 150Mbps with 1T1R 802.11n
• Long range transmitting Transmit power control and distance control (ACK timeout)
• Signal Strength Display Indicate RF signal strength to be shown as LEDs of 3 colors, making network buildup easier. LED indicators have the best transmit and receive signal for traffic
  communication
• RSSI Indicator Shown user every incoming RF signal strength measurement
• PoE Support Support proprietary 12V passive power over Ethernet

Software

• Multiple SSID 4 SSID supported. Each SSID can set itself wireless or WAN access setting
• PPPoE Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep
  trying when failed or disconnected
• PPTP
  Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual
  private networks
• VLAN Pass-through Support VLAN Pass-through
• WiFi Scheduling User could set a schedule for turning-on/off WiFi Radio
• Firmware Upgrade Upgrading firmware via web browser, setting are reserved after upgrade
• Reset & Backup Reset to factory default. User can export all setting into a file via WEB
• Ping & Trace Route Built-in PING function & Trace Route function in Web GUI
• MIB MIB I, MIB II(RFC1213), Private MIB
• SNMP V1, V2c, V3

Hardware Specifications

• MCU Atheros AR7240
• RF Atheros AR9285
• Memory 32MB
• Flash 8MB
• Physical Interface 2 x RJ-45 for 10/100 Fast Ethernet
• 1 x Reset Button
• Power Requirements
  - Active Ethernet (Power over Ethernet)
  - Proprietary PoE design
  - Power Adapter 24V / 0.6A

RF Specifications

• Frequency Band 802.11b/g/n
  Data rate 150 Mbps
• Radio Frequency Band
  (The Max. Power may be
  different depending on local
  regulations)
• Channel Data Rate Tx Avg. Power
  (±2dBm)
  Rx Sensitivity
  (±2dBm)
  802.11b(2.412
  ~ 2.472GHz)
  1Mbps 26 -97
  2Mbps 26 -95
  5.5Mbps 26 -93
  11Mbps 26 -90
  802.11g(2.412
  ~ 2.472GHz)
  6Mbps 26 -96
  9Mbps 26 -92
  12Mbps 26 -89
  18Mbps 26 -85
  24Mbps 26 -82
  36Mbps 25 -80
  48Mbps 23 -78
  54Mbps 22 -75
  802.11n(2.412
  ~ 2.472GHz)
  MCS0 / MCS8 26 -95
  MCS1 / MCS9 26 -92
  MCS2 / MCS10 26 -87
  MCS3 / MCS11 26 -85
  MCS4 / MCS12 25 -80
  MCS5 / MCS13 24 -78
  MCS6 / MCS14 22 -74
  MCS7 / MCS15 21 -71
• Antenna Internal 8dBi Directional Antenna

Hardware

• Operation Mode Access Point / Client Bridge / Client Router / WDS
• Wireless/Network
  Auto Channel Selection (Setting varies by Regular Domains)
  Obey Regulatory Power
  Distance Control (802.1x Ack timeout)
  CLI Supported
  802.1x Supplicant (CB Mode)
  Multiple SSID (4 SSID), BSSID
  WDS AP / WDS Bridge / WDS Station
  Multicast Supported
  RADIUS Accounting
  VLAN Tag / VLAN Pass-through
  Auto Reboot
  WiFi Scheduling
• Security
  WEP Encryption-64/128/152 bit
  WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
  WPA/WPA2 Enterprise (WPA-EAP using TKIP)
  Hide SSID in beacons
  MAC address filtering, up to 50 field
  Wireless STA (Client) connected list
• QoS WMM

Environmental and Mechanical

• Temperature Range Operating -20°C~70°C
• Storage -30°C to 80°C
• Humidity (non-condensing) 0%～90% typical
• Dimensions 186mm (L) x 100mm (W) x 29mm (H)
• Weight 300g

Package Content

• 1 x ENS200
• 1 x Power Adapter (24V/0.6A)
• 1 x PoE Injector (EPE1212)
• 1 x Pole Mount Set
• 1 x Screw Set
• 1 x Technical Support Card