Funkwerk RT1202 VPN Gateway
The Funkwerk RT1202 VPN Gateway is a powerful and, thanks to its comprehensive equipment, flexible media and VPN gateway. With its 19-inch metal housing and highly efficient internal switched-mode power supply the fan-free and hard drive-free design guarantees long-term reliability in critical corporate applications.
Funkwerk RT1202 VPN Gateway Features
- 2 * ISDN BRI; 4 DSP Channels
- VoIP and fax over IP (T.38)
- CAPI server virtualisation + fax G3
- 5 * Gigabit Ethernet
- 19" chasis with integrated power supply
- IPsec - 10 tunnels, opt. up to 110
Two configurable BRI interfaces (NT/TE) for the use of up to 4 ISDN B-channels and the integrated 4-channel DSP permit four simultaneous hybrid voice connections (VoIP) and fax traffic (FoIP). The Funkwerk RT1202 has five Gigabit Ethernet ports, which can be configured for LAN, WAN or DMZ, and comes with a licence for 10 out of a possible 110 hardware-accelerated IPSec tunnels. This makes the RT1202 ideal for use as a media and VPN gateway in SMEs and company head offices.
As the remote CAPI is a network application, which operates independently of the MS Windows© operating system software, it is ideal for server use. Consequently, CAPI applications can be installed and maintained without suspending operation and no reboot of the server is required. The software supports 16/32/64 Bit operating systems and applications. The remote CAPI is also available for Linux.
This function is groundbreaking for the use of virtual machines. MS Hyper-V©, MS virtual PC©, VMware©, virtualBoxand other virtual platforms do not offer an option to connect ISDN cards. The bintec remote CAPI avoids this problem and thereby allows fax and unified communication servers to be operated on virtual systems.
With the RT1202 up to 4 telephone calls and fax transmissions (T.38) can be transferred simultaneously between the IP network and the traditional telephone network. This can be carried out either directly as a terminal adapter (an ISDN telephone is registered with the VoIP provider) or using a PBX.
Funkwerk RT1202 VPN Gateway - Technical Specifications
Remote CAPI / Fax Media Gateway
- Multiserver CAPI A computer can use several CAPI server simultaneously
- Multisite CAPI Several computer can use the same BRI port
- Access Control Prevention by user passwort concept
- ISDN server virtualising Unlimited usage on virtual computers
- Fax profile Fax group 3
- Number of parallel fax channels 4 fax channels
- Maximum data rate 14,400 Baud
- Fax standard Fax protocol T.30
- Protocols for fax data transmission Fax data transmission according V.21, V.27, V.29, V.17
- CAPI controller features CAPI possibilities: Internal controller, supplementary services, DTMF (MFV), HOLD, ECT, 3PTY, CF, CD, MWI
- B channel layer 1 protocols 64 kbps HDLC, 64 kbps bit transparent, V.110, T.30 fax G3, 56 kbps bit transparent
- B channel layer 2 protocols ISO 7776 (X.75 SLP), transparent, LAPD D-CH X.25 (SAPI 16), T.30 fax G3, PPP, V.120 asyn., V.120 Bit transparent, LAPD free SAPI
- B channel layer 3 protocols Transparent, T70/90NL, ISO 8208 (X.25 DTE-DTE), X25DCE, T.30 fax G3, T.30 fax G3 extended
- Fax data compression standards T.4 (MH-, MR compression), T.6 (MMR compression)
ISDN Interface
- CAPI CAPI 2.0 with CAPI user concept (password for CAPI use)
- ISDN protocols Euro-ISDN (Point-to-mulitpoint/Point-to-point)
- ISDN leased lines Supported leased lines: D64S, D64S2, TS02, D64S2Y
- ISDN auto-configuration Automatic recognition and configuration of ISDN protocols
- B channel protocols Excellent interoperability with other manufacturers (Raw HDLC, CISCO HDLC, X.75)
- X.31 over CAPI Support for various connection paths: X.31/A for ISDN D-channel, X.31/A+B for ISDN
- B-channel, X.25 within ISDN B-channel (also leased lines)
- Bitraten-Adaption V.110 (1,200 up to 38,400 bps), V.120 up to 57,600 kbps (HSCSD) for connection to GSM subscribers
Security
- NAT/PAT Symmetric Network and Port Address Translation (NAT/PAT) with random generated ports inclusive Multi NAT (1:1 translation of whole networks)
- Policy based NAT/PAT Network and Port Address Translation via different criteria like IP protocols, source/destination
- IP Address, source/destination port
- Policy based NAT/PAT For incoming and outgoing connections and for each interface variable configurable
- Content Filtering Optional ISS/Cobion Content filter (30 day test license inclusive)
- Stateful Inspection Firewall Packet filtering depending on the direction with controling and interpretation of each single connection status
- Packet Filter Filtering of IP packets according to different criteria like IP protocols, source/destination IP address, source/destination port,
TOS/DSCP, layer 2 priority for each interface variable configurable
Routing
- Policy based Routing Extended routing (Policy Based Routing) depending of diffent criteria like IP protocols (Layer4), source/destination
IP address, source/destination port, TOS/DSCP, source/destination interface and destination interface status
- Multicast IGMP Support of Internet Group Management Protocol (IGMP v1, v2, v3) for the simulaneous distribution of IP packets to several stations
- Multicast IGMP Proxy For easy forwarding of multicast packets via dedicated interfaces
- Multicast Routing Protocol PIM SM Protocol Independent Multicast (PIM) distributes information via a central Rendezvous Point Server.
PIM Modus Sparse Mode (SM) is supported: forwarding only packets to groups, which have the packets ordered.
- Multicast inside IPSec tunnel Enables the transmission of multicast packets via an IPSec tunnel
- RIP Support of RIPv1 and RIPv2, separated configurable for each interface
- Extended RIP Triggerd RIP updates according RFC 2091 and 2453, Poisened Rerverse for a better distribution of the routes; furthermore the
possibility to define RIP filters for each interface.
- OSPF Support of the dynamic routing protocol OSPF
- BGP4 On request
Protocols/Encapsulations
- PPP/MLPPP Support of Point to Point Protocol (PPP) for establishing of standard PPP connections, inclusive the Multilink extension MLPPP for the
bundeling of several connections
- PPPoE (Server/Client) Point-to-Point Protocol over Ethernet (Client and Server) for establisching of PPP connections via Ethernet/DSL (RFC 2516)
- MLPPPoE (Server/Client) Multilink extension MLPPPoE for bundeling several PPPoE connections (only if both sides support MLPPPoE)
- DNS DNS client, DSN server, DNS relay and DNS proxy
- DYN DNS Enables the registering of dynamic assigned IP addresses at adynamic DNS provider, e.g. for establishing of VPN connections
- DNS Forwarding Enables the forwarding of DNS requests of free configurable domains to assigned DNS server.
- DHCP DHCP Client, Server, Proxy and Relay for siplified TCP/IP configuration
- Packet size controling Adaption of PMTU or automatic packet size controling via fragmentation
- X.25 Enhanced Optional: X.25 over ISDN, XOT, X.25 to TCP Gateway, X.25 PAD, TP0 Bridge
