Funkwerk W1002n Indoor WiFi SMB Access Point
- WLAN according to IEEE 802.11n
- Dual-band radio module with 2.4 GHz and 5 GHz
- Physical data rates of up to 300 Mbps
- Compatible with IEEE 802.11agbh devices
- Operation as access point, bridge, WDS, client
- Integrated VPN router, providing up to 110 tunnels simultaneously
- Distinct increase of data rates for LAN-to-LAN coupling compared with conventional WLAN bridges
- PoE (Power over Ethernet) according to IEEE 802.3af
With the IEEE 802.11n compatibility mode, the W1002n offers compatibility with all previous IEEE 802.11g or IEEE 802.11abgh clients and supports the mixed operation of clients according to IEEE 802.11n and clients according to IEEE 802.11b/g or IEEE 802.11a/h. This permits the trouble-free replacement of existing access points by the new W1002n without the necessity of exchanging the previous clients. Clients already supporting 802.11n will automatically benefit from the higher throughput and the better coverage of areas.
The operation of two W1002n devices in the bridge mode permits the setup of line-of-sight radio links. Here, again, the benefits of the IEEE 802.11n technology can be used by transferring two separate data streams. The application of dual polarization antennas permits easy installation. Dual polarization antennas consist of two antenna segments, which are polarized orthogonally to each other. They, therefore, provide 2 cable connections. This means that the W1002n transmits two separated partial streams from a to b, as defined by IEEE 802.11n. With this technology, more than triple the data rates can be reached compared to the previous technology. At a distance of 1000 m, net data rates of approximately 75 Mbps (TCP/IP) can be attained by using our dual polarization antennas.
The power supply is either performed by means of a highly efficient 230-V plug-in power supply or via PoE (Power over Ethernet) according to Standard IEEE 802.3af. In the case of operation via PoE, it suffices to use a default PoE injector or, for instance, a Funkwerk S128p switch with integrated PoE feeding. Expensive special PoE injectors are not required for the W1002n.
For the application on the medical sector, the W1002n has been granted admission according to EN60601-1-2, like its predecessor W1002.
Technical Specifications
Operating Modes
- WLAN disabled: In this operation mode the device is a powerful 2-port VPN router
- WLAN access point: WLAN access point with VPN router functionalities
- WLAN bridge: Point-to-point and point-to-multipoint mode (up to 8 links)
- WLAN client: Transparent client for direct connection of Ethernet devices
Security
- Encryption WEP/WPA: WEP64 (40 Bit key), WEP128 (104 Bit key), WPA personal, WPA enterprise, WPA2 personal, WPA2 enterprise
- IEEE802.11i authentication and encryption: 802.1x/EAP-MD5, 802.1x/EAP-TLS, 802.1x/EAP-TTLS, 802.1x/EAP-PEAP, key management, PSK/TKIP encryption, AES encryption, 802.1x/EAP
- Access control list (ACL): MAC address filter for WLAN clients
- VLAN: Network segments on layer2 possible. Per SSID one VLAN ID available. Static VLAN configuration according IEEE 802.1q; up to 32 VLANs supported.
- Inter cell repeating: Inter traffic blocking for public hot spot (PHS) applications for preventing of communication radio client to radio client in a single radio cell.
- NAT/PAT: Network & Port Address Translation / Stateful Packet Inspection: Isolation of complete network from public access
- VPN - IPSec: 10 tunnels inclusive, 100 more via separate license
- VPN - IPSec: Powerful encryption up to 256 bits (AES, 3DES, DES, CAST, Blowfish, Twofish)
- VPN - IPSec DPD: Dead Peer Detection for IPSec tunnels
- VPN - PPTP: Integrated
- VPN - PPTP: Strong encryption up to 128 bits (MPPE), up to 168 bits (DES/3DES, Blowfish)
- DynDNS / DynVPN: Router can still be reached over the Internet in spite of dyn. IP address
- IKE for IPSec: Pre-Shared Keys and X.509 certificate support X.509 X.509 v1/v3 certificates (PKCS#7/8/10, 12, CLRs, SCEP)
- QoS for IPSec: Available
- PKI Support for IPSec: Available
- NAT Traversal for IPSec: Available
- IPCOMP: IP compression
- IPSec / RADIUS: Available
- IPSec redesign: Policy manager and interface concept
- L2TP: Layer 2 tunnelling protocol for ATM, Ethernet, PPP; user authentication
- GRE: V.0 according RFC 2784 for common encapsulation
- Hardware encryption: 3DES, AES and RC4
Wireless LAN Features
- WLAN standards: 802.11n (Mimo 2x3); 802.11b; 802.11g; 802.11a; 802.11h
- Frequency bands 2.4 GHz indoor/outdoor (EU): 2.4 GHz Indoor/Outdoor (2412-2472 MHz) max. 100 mW EiRP. This information is related to the permitted transmission power in Germany. The permitted transmission power may vary in other countries.
- Frequency bands 5 GHz indoor (EU): 5 GHz indoor (5150-5350 MHz) max. 200 mW EiRP allowed. This information is related to the permitted transmission power in Germany. The permitted transmission power may vary in other countries.
- Frequency bands 5 GHz outdoor (EU): 5 GHz outdoor (5470-5725 MHz) max. 1000 mW EiRP allowed. This information is related to the permitted transmission power in Germany. The permitted transmission power may vary in other countries.
- Frequency bands 5.8 GHz BFWA (Germany): 5.8 GHz BFWA (5755-5875 MHz) max. 4000 mW EiRP allowed. This information is related to the permitted transmission power in Germany. For the usage in other countries, please contact the location regulation authorities.
- WLAN modes: 2.4 GHz operation: 802.11b only; 802.11g only, 802.11b/g/n mixed; 802.11b/g/n mixed long; 802.11b/g/b mixed short; 802.11b/g/n; 802.11g/n; 802.11n only; 5 GHz Operation: 802.11a only; 802.11a/n; 802.11n only
- Automatic Rate Selection (ARS): Available
- Transmission rate: Automatic fallback or fixed transmission rate selectable
- Data rates for 802.11b,g (2.4 GHz): 11, 5.5, 2 und 1 Mbps (DSSS modulation); 54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM modulation)
- Data rates for 802.11a,h (5 GHz): 54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM modulation)
- Data rates for 802.11n (2.4 / 5 GHz): MSC0-15 enables physical rates up to 150 Mbps at 20 MHz channels bandwidth, 2 streams, short guard interval; MSC0-15 enables physical data rates up to 300 Mbps at 40 MHz channels bandwidth, 2 streams, short guard interval
Software Features
- Roaming (access point mode): Seamless roaming with IAPP (artem Inter Access Point Protocol)
- Fast roaming 802.1x (access point mode): Pre authentication and PMK caching allows fast roaming by 802.1x encryption
- Roaming behaviour (client mode): Adjustable (no, slow, normal, fast, customized roaming). Adaptable for fast movable client (i.e. vehicle), to guarantee a roaming without interruption. This is achieved by scanning of the relevant channels in the background.
- WDS: Wireless Distribution System: Include high security TKIP and AES, interoperable with other devices from the Funkwerk-EC portfolio (not bintec W500)
- Bridge: point-to-point / point-to-multipoint: Point-to-point connection between two access points, point-to-multipoint connection between up to eight partners access points
- Bridge: Full remote configuration: Protocol with encrypted transmission. RTS/CTS threshold adjustable.
- Operating channels: According to the regulatory domain. Transmit speed: Auto fallback or selectable fixed rate.
- Bridge link test: Via the link test the quality of a bridge link can be measured.
- Bridge link encryption: With high security TKIP and AES possible
- Client mode: Routing or bridge mode possible. In bridge mode multiple IP based end devices can be operated simultaneously and additionally one non-IP-based end device
- Buffer pool: For cushioning of peaks
- WMM 802.11e QoS: Data prioritization for TOS data, 802.11e/WMM
- WMM Power Save (U-APSD): Support of active WLAN clients, which support 802.11e power save
- Internet dialup: PPPoE, PPTP
- Load balancing: Session-round-robin, load-dependent bandwidth
- BLD: Broken Link Detection (BLD) per SSID possible.
- NTP: NTP client, NTP server, manually
- DNS: DNS client, DNS server, DNS relay
- DHCP: DHCP client, DHCP server, DHPC relay
Hardware Features
- Certifications: Wi-Fi Certified according 802.11abgn (Rel.7.9.4)
- Standards and certifications: R&TTE Directive 1999/5/EG; EN 60950-1 (IEC60950); EN 300 328; EN 301 489-17; EN 301 489-1; EN 301 893; EN 60601-1-2 (medical electrical devices - Part 1-2)
- LAN / WAN: 2 x 10/100 Mbps Ethernet twisted pair, autosensing, auto MDI/MDI-X
- Serial interface: V.24 interface with D-Sub9 jack for configuration
- WLAN: IEEE 802.11a/b/g/n; 1 radio module, 2.4 und 5 GHz band, 3 external antennas
- Antenna: Three antenna connectors with RTNC jacks; delivered incl. three 2.5 dBi omni-directional antennas
- Real time clock: Even at power loss the system time will be available for several hours.
- Power supply: External wall power supply 230V / 12 V DC, 1 A, with high efficient switching power supply
- PoE: Power-over-Ethernet according IEEE 802.3af
- Status LEDs: Status + activity for WLAN, Ethernet 1, Ethernet 2
- Theft protection: Theft protection optional available
- Wall mounting: Integrated in the housing design
- Dimensions: Approx. 16.3 cm x 16.8 cm x 5 cm (width x depth x hight)
- Weight: Approx. 400 g
- Power consumption: Less than 10 Watt
- Environment: Temperature operating: 0°C to 40°C; storage: -10°C to 70°C; rel. humidity 10 to 95% (non condensing)
For more technical specifications information, please refer to the Funkwerk W1002n Datasheet (PDF).
