Availability: Out Of Stock

Funkwerk W500 Indoor WiFi SOHO Access Point

The Funkwerk W500 is the entry model for small companies and home offices and enable the user to set up a simple and cost optimized secure wireless network access. The unit supports the 802.11g standard with 54Mbps. The WPA-/WPA2 security Mode ensures for security at highest level for private and business applications.

The Funkwerk W500 works as an Access Point and can also operat as a Wifi-Client. In Wifi-Client operation any device that has a Ethernet port can be connect to the wireless network. Nevertheless the bintec W500 can operate as a repeater or can be used to set up Bridge Links. The smooth integration of LAN with the 10/100 Base-T-interface supports crossover (Auto-MDI/MDI-X) and the binding from Wifi clients to the bintec W500 is very simple and takes only a few seconds if the Wifi client supports also WPS.

With the 5dBi omni-directional antenna that comes with the bintec W500 you already have excellent coverage, however the detachable antenna can be replaced by an external high gain beam antenna to improve the coverage for point to point connections.

The bintec W500 is made for customers that do not accept compromise in security, stability or functionality for low budget units.

Wireless LAN Features

• Operation mode Selectable: Access Point, Wireless Client (Ethernet Adapter), AP+Repeater (WDS), Bridge
• Standards: 802.11g,b
• Frequency: 2,412 to 2,472 GHz
• Channels: 1 - 13
• Data rates: Modulation: 11, 5,5, 2 und 1 Mbps (DSSS); 54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM)
• Transfer rate: Automatic fallback or selectable transfer rate
• Super-G Mode: Support the Atheros Super-G Mode (108Mbps) together with a compatible client (i.e. funkwerk W-Client USB.11abg)
• Transmit power: Maximum 14dB + 5dB antenna gain; Selectable in 5 steps
• Receiver Sensitivity: 802.11g   54Mbps  = -65dBm; 802.11b   11Mbps  = -80dBm
• Modulation: 802.11g (OFDM) 64QAM, 16QAM, QPSK, BPSK; 802.11b (DSSS)   CCK,DQPSK, DBPSB
• Antenna: 5dBi omni-directional antenna, detachable; At the unit is a RSMA connector  (male)
• Wireless Distribution System (WDS): Supported; Security: WEP, WPA, WPA-2
• Automatic Rate Selection (ARS): Supported
• Wireless Protected Setup (WPS): Pin Client, Pin AP, Push-Button Method
• WMM (Wi-Fi Multimedia): Supported
• Maximum number of Client: 1 - 32

Maintenance and Service

• GUI: Web-GUI in German and English language
• Compoint Manager Support: yes
• Statistic: Log file; Statistics of all relevant packet types; List of all associated Wifi clients

Hardware Features

• LAN Interface: 10/100Base-T Ethernet, Full duplex with Auto MDI/MDIX support; fixed IP Address or DHCP Client
• Power supply: 12V/1A DC via wall adapter
• Power supply unit: Wide range switched powered wall adapter 100-240V AC 50/60Hz
• Power consumption: 3,5 Watt
• Reset Button: Set the device to back factory settings
• LEDs: Operation, LAN Link, Wifi active, WPS
• Dimensions: 110 x 125 x 30 mm (length x wide x height)
• Wall mounting: Integrated in the housing design
• Environment: Operation 0-50° C, max.90% humidity (not condensing)
• Environment: Storage -10-65° C, 5-95% humidity
• Certification: R&TTE Directive 1999/5/EG; EN 60950-1; EN 300 328 V1.6.1; ETSI EN 301 489-1 V1.5.1; ETSI EN 301 489-1/17 V1.2.1; EN 50371

Security

• Standards: WEP (64,128,154bit), WPA, WPA2, 802.1x
• Network Name (SSID): Changeable and visibility on/off
• Access Control List (ACL): Up to 32 MAC Addresses as White List or as Black List
• Intercell Repeating: On/off (Allow or disallow the communication between associated Wifi client)
• WLAN on/off: Supported

Specifications Tab

Questions Tab