Availability: In Stock
LANCOM OAP-54 Outdoor Access Point
Dual-band outdoor access point for bridging large distances, campus coverage or for establishing hotspots
- Outdoor dualband access point for 2.4-and 5-GHz operation
- Two integrated 54/108 Mbps wireless modules for simultaneous operations with IEEE 802.11a/b/g/h
- IP66 housing with heating and cooling for -30 ºto +70 º
- No-problems installation even away from power-supply points with Power over Ethernet
- Optional connection of external antennas
- Secure wireless LAN through IEEE 802.11i, IEEE 802.1x/EAP, LEPS, with AES encryption in hardware
- Secure Internet access via the integrated DSL router with stateful inspection firewall with intrusion detection/denial-of-service protection
- Separation of user groups by Multi-SSID and VLAN
- Optional: VPN site coupling, Hotspot support
The outdoor access point LANCOM OAP-54 Wireless has an IP-66 housing which is resistant to strong water jets, features integrated heating and cooling, and can be sturdily mounted on walls or poles, all of which makes it ideally suited for locations where the demands on stability and robustness are highest. Be it in mountainous terrain or from roof to roof in the city–the LANCOM OAP-54 Wireless can support stable, high-performance, long-serving WLANs in any environment. It can be mounted easily, flexibly, and up to 60 m from the nearest power supply thanks to Power over Ethernet.
More flexibility
With two integrated 108-Mbps wireless modules that comply with the WLAN standards IEEE 802.11a/b/g/h, the LANCOM OAP-54 Wireless can be operated in parallel in the 2.4-GHz and 5-GHz frequency bands. This makes this access point ideal as a relay to extend point-to-point wireless connections, or as a wireless-connection end point that provides WLAN coverage to public spaces. With one LAN and one WAN connector each and the integrated DSL router, LANCOM OAP-54 also serves as a central firewall and Internet gateway, and optionally as a VPN gateway for secured site coupling.
More Security
LANCOM sets the standards in WLAN security. A comprehensive range of security technologies is supported in wireless LAN including IEEE 802.11i, 802.1x, WPA, WPA2, WEP64/128/152, access control lists or LEPS (LANCOM Enhanced Passphrase Security), which enables the configuration of an optimized solution, whatever the individual requirements. For example, Multi SSID allows the definition of up to 8 user groups, each with its own level of security. The integrated firewall with the latest security functions such as stateful inspection, intrusion prevention and denial-of-service protection will screen your network safely and reliably from external attack. LANCOM routers and access points support VRRP (Virtual Router Redundancy Protocol) to assure high availability in case of hardware failure. Outstandingly flexible backup solutions can be realized simply by adding in alternative devices, which can be from any vendor as the technology is non-proprietary.
Professional management
LANCOM's WLAN management tools offer real benefits to network administrators for the installation, control and monitoring of access points. Supplied with the product, LANmonitor helps to optimize the alignment of point-to-point links, aids diagnosis, and offers network monitoring. LANCOM WLANmonitor gives you a complete overview of all WLAN networks and clients within range; LANconfig has convenient functions for the remote configuration of APs individually or in groups, and it has functions for managing large-scale projects.
More Reliability for the Future
From the very start, LANCOM products are designed for a product life of several years. They are equipped with hardware dimensioned for the future. Even reaching back to older product generations, updates to the LANCOM Operating System–LCOS–are available several times a year, free of charge and offering major features. LANCOM offers unbeatable protection of your investment!
What’s more...
To complete the WLAN portfolio, LANCOM also offers suitable AirLancer client adapters and a large selection of high-end antennas for professional indoor and outdoor applications.
Technical Specifications
WLAN
- Frequency band 2.4 GHz and 5 GHz: 2400-2483.5 MHz (ISM) and 5150-5825 MHz (depending on country-specific restrictions)
- Data rates 802.11b/g: 54 Mbps to IEEE 802.11g (fallback to 48, 36, 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection) compatible to IEEE 802.11b (11, 5.5, 2, 1 Mbps, Automatic Rate Selection), 802.11 b/g compatibility mode or pure g or pure b, Super A/G with Turbo Mode (108 Mbps), bursting, compression
- Data rates 802.11a/h: 54 Mbps to IEEE 802.11a/h (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection), Super A/G with Turbo Mode (108 Mbps), bursting, compression, fully compatible with TPC (adjustable power output) and DFS (automatic channel selection, radar detection) according to ETSI EN 301 893 V. 1.5.1
- Range (outdoor / P2P): More than 20 km in 5 GHz.
- Output power at radio module, 2.4 GHz:
- 802.11b: +19 dBm @ 1 and 2 Mbps, +19 dBm @ 5.5 and 11 Mbps
- 802.11g: +19 dBm @ 6 Mbps, +14 dBm @ 54 Mbps
- Output power at radio module, 5 GHz:
- 802.11a/h: +18 dBm @ 6 Mbps, +12 dBm @ 54 Mbps with transmission power control (TPC) and manual power settings
- Max. radiated power (EIRP), 2.4 GHz band:
- 802.11b/g: Up to 20 dBm / 100 mW EIRP (transmission power control according to TPC or manual settings)
- Max. radiated power (EIRP), 5 GHz band:
- 802.11a/h: Up to 30 dBm / 1000 mW or up to 36 dBm / 4000 mW EIRP (depending on national regulation on channel usage and subject to further obligations such as TPC and DFS)
- Minimum transmission power: Transmission power reduction in software in 1 dB steps to min. 0.5 dBm
- Reception sensitivity 2.4 GHz:
- 802.11b: -87 dBm @ 11 Mbps, -94 dBm @ 1 Mbps
- Reception sensitivity 5 GHz:
- 802.11a/h: -67 dBm @ 54 Mbps; -87 dBm @ 6 Mbps
- Radio channels 2.4 GHz: Up to 13 channels, max. 3 non-overlapping (2.4 GHz band)
- Radio channels 5 GHz: Up to 26 non-overlapping channels (available channels and further obligations such as automatic DFS dynamic channel selection depending on national regulation)
WLAN operating modes
- WLAN access point: Infrastructure mode (autonomous operation or managed by LANCOM WLAN Controller).
- WLAN bridge: Point-to-multipoint connection of up to 7 Ethernet LANs (mixed operation optional), broken link detection, blind mode, supports VLAN. When configuring Pt-to-Pt links, pre-configured names can be used as an alternative to MAC Adresses for creating a link. Rapid spanning-tree protocol to support redundant routes in Ethernet networks.
- WLAN router: Use of the LAN connector for simultaneous DSL over LAN, IP router, NAT/Reverse NAT (IP masquerading) DHCP server, DHCP client, DHCP relay server, DNS server, PPPoE client (incl.Multi-PPPoE), PPTP client and server, NetBIOS proxy, DynDNS client, NTP, port mapping, policy-based routing based on routing tags, tagging based on firewall rules, dynamic routing with RIPv2, VRRP.
- WLAN client: Transparent WLAN client mode for wireless Ethernet extensions, e.g. connecting PCs or printers by Ethernet; up to 64 MAC addresses. Automatic selection of a WLAN profile (max. 8) with individual access parameters depending on signal strength or priority.
Statistics
- Statistics: Extensive Ethernet, IP and DNS statistics; SYSLOG error counter
- Accounting: Connection time, online time, transfer volumes per station. Snapshot function for regular read-out of values at the end of a billing period. Timed (CRON) command to reset all counters at once
- Export: Accounting information exportable via LANmonitor and SYSLOG
Hardware
- Power supply: Via Power over Ethernet (max. distance between access point and injector 60 m), 1 x PoE Injector supplied
- Environment: -30°C to +65°C at 95% max. humidity (non condensing)
- Housing: 235 mm x 210 mm x 80 mm (W x H x D), 3.4 kg, robust metal housing, IP 66 protection rating, ready for wall and top-hat rail mounting, 6 LEDs for status display
- Power consumption (max): ca. 25 Watts
- Note: Operates with the supplied PoE adapter only
Declarations of conformity
- CE: EN 301 489-1, EN 301 489-17, EN 60950
- 2.4 GHz WLAN: ETS 300 328
- 5 GHz WLAN: EN 301 893 version 1.5.1
- Notifications: Certifications notified in Germany, Belgium, Netherlands, Luxembourg, Austria, Switzerland, UK, Italy, Spain, France, Portugal, Czech Republic, Denmark
Package content
- Manual: Printed User Manual (DE, EN) and Quick Installation Guide (DE/EN/FR/ES/IT/PT/NL)
- CD: Data medium with firmware, management software (LANconfig, LANmonitor, WLANmonitor) and documentation
- Cable: Water-resistant, UV-resistant Ethernet PoE cable with water-resistant screw connector, 15m
- Antennas: Two 3 dBi dipole dualband antennas
- Power supply unit: Via Power over Ethernet, 1 x PoE Injector supplied
Support
- Warranty: 3 years & Support via Hotline and Internet KnowledgeBase
- Software updates: Regular free updates (LCOS operating system and management tools) via Internet
For more technical specifications information, please refer to the LANCOM OAP-54 Datasheet (PDF).
