Mimosa A6 PTMP 7Gbps Wireless Access Point
The Mimosa A6 fixed wireless access point delivers up to 7Gbps capacity, unbelievable subscriber capacity, and synchronized network scalability for unlicensed, outdoor, fixed wireless PTMP networks. The first future-proof solution delivering fiber fast gigabit speeds to subscribers via wireless, the A6 extends beyond the traditional 5 GHz band to take advantage of expanded 160 MHz channels in the new, low-noise 6 GHz band.
Mimosa A6 Key Features
- 10 Gigabit Ethernet: (2) SFP+ (optical) ports
- Management Services:
- Smart Spectrum Management:
Scalable, Low-Noise 6 GHz Band
Previous OFDM-based fixed wireless solutions lacked subscriber scalability, requiring costly investment in too many AP sites, introducing massive interference in an already crowded 5 GHz band, with no noise mitigation capabilities.
Superior Wi-Fi 6E Technology
Armed with the latest Wi-Fi 6E technologies, including 8x8 MU-MIMO, 1024-QAM, noise fighting beamforming, massively reduced resource unit size, low-latency OFDMA, and network wide GPS sync, the A6 resets nearly every performance and scalability bar in the industry.
Extreme Performance and Value
Pairing these incredible innovations with brand new, interference-free 6 GHz spectrum, the A6 can deliver gigabit+ subscriber speeds needed for advanced rural broadband projects, and the high-scalability to tackle the most dense, urban NLOS areas cost effectively.
Mimosa A6 Technical Specifications
General
- Max Throughput: 7Gbps IP aggregate UL/DL (9608Mbps PHY)
- Wireless Protocols: WiFi Interop; TDMA (future release)
- MIMO & Modulation: 8x8MU-MIMO; OFDMA, BPSK-1024QAM
- Bandwidth: Single or dual 20/40/80/160 MHz channels
- Frequency Range: 5150MHz – 6425MHz Restricted by country of operation
- Max Output Power: 29dBm
- Rx Sensitivity: @ 1024 QAM
- -47dBm @ 160MHz
- -50dBm @ 80MHz
- -53dBm @ 40MHz
- -56dBm @ 20MHz
- Enclosure Characteristics: Outdoor UV-stabilized, engineered polymer with integrated metal mounting back
- Network Interface: (1) GbE copper PoE, (2) 10GbE SFP+ (optical)
- Gain: 24dBi with adaptive beamforming
- Beamwidth: 90° azimuth, 7° elevation
- Front-to-Back Ratio: >30dB
- Cross-Polar Isolation: >20dB
- Polarization: Dual-linear XPIC
- Max Power Consumption: 40W
- System Power Method: Outdoor PoE or DC
- PoE Power Supply: Passive PoE compliant, 48–56 V (not included)
- Outdoor Ingress Protection Rating: IP67
- Operating Temperature: -40°C to +55°C (-40°F to 131°F)
- Security: WPA3; AES; RADIUS; 802.1x authorization
- QoS: Supports 4 user-configurable QoS levels for SRS (GPS Sync) (CBWFQ); Behavior Aggregate (BA) and CoS Classifier, with user-configurable precedence
- VLAN: Per subscriber VLAN, Q-in-Q, triple tagging; Management VLAN
- Collocation Synchronization: 1PPS GPS TX/RX synchronization for collocated co-channel radios; Adjustable up/downstream bandwidth ratio
- Approvals: FCC Part 15.407; IC RSS210; CE (RED, EMCD, LVD, RoHS); ETSI 301 893/302 502
- RoHS Compliance: Yes
Product Includes
- (1) Mimosa A6 Access Point 100-00113
