Proxim Tsunami MP 8150 CPE Point-to-Multipoint Backhaul Link

Cost Effective Subscriber Solution

Tsunami™ MP 8150 CPE is a cost optimized high performance 100 Mbps customer premises equipment in a compact form factor. Ideal for large-scale wireless deployments, from last-mile broadband wireless access to rural broadband wireless service providers

NLOS and Advanced Features

2x2 MIMO and advanced OFDM features of the on-board high-power 24dBm radio makes this CPE the best performing Non Line-of-Sight wireless radio available in the market
Carrier Grade Advanced Security

Implements military-grade security standards with AES-128 bit encryption, Proxim’s proprietary Wireless Outdoor Routing Protocol (WORP) which prevents snooping, and features highly-secure remote management via SSL, SSH and SNMPv3

Flexible Channel Planning Worldwide

Supports a wide range of frequencies from 5.3 - 6.1 GHz to maximize your deployment flexibility in the field
Ease of Use

A compact outdoor form factor with Dynamic Data Rate Selection, Spectrum Analyzer and other installation friendly features makes this CPE a very easy install

Centralized Management

Our ProximVision ES centralized network management system can easily configure and monitor your CPE network remotely from a PC in your command center

Product Models

• MP-8150-CPE-100a-US Tsunami MP 8150 CPE, 100Mbps, MIMO 2x2, 16dBi Integrated antenna – US SKU
• MP-8150-CPE-100a-WD Tsunami MP 8150 CPE, 100Mbps, MIMO 2x2, 16dBi Integrated antenna – World SKU

Radio & TX Specs

• MIMO: 2x2
• MODULATION OFDM with BPSK, QPSK, 16QAM, 64QAM
• Operating Frequency: 5.3 - 6.1 GHz (Subject to Country Regulations and product model)
• Channel Size: 20MHz & 40MHz
• Data Rate: Up to 300Mbps
• TX Power: Up to 24dBm
• TX Power Control: 0.5 dB steps

Latency

Latency: 5ms (typical)

Wireless Encryption

Security: 128-bit AES

Antenna

Integrated 16dBi dual polarized (Horizontal + Vertical) panel antenna

Interfaces

• Wired Ethernet One Auto MDI-X RJ45 100Mbps Ethernet port
• Wireless Protocol WORP (Wireless Outdoor Router Protocol)

Management

• Local: RS-232 serial port with RJ11 front face
• Remote: Telnet and SSH, Web GUI and SSL, TFTP, SNMPv3
• SNMP: SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412,RFC-3414, Private MIB

Network

• Large Frame: up to 2048 bytes
• Throughput: 100Mbps(Max)

Gateway Features   

• DHCP Client/Server/Relay/NAT with Std ALGs, Bridging, Routing & Syslog
• QoS: Asymmetric Bandwidth Control, Packet Classification Capabilities, Scheduling
• VLAN: 802.1Q: Management VLAN, Transparent, Access and Trunk mode

Environment Specification

• Operating Temperature: -35º to 60º C (-31º to 140º F)
• Storage Temperature: -40º to 70ºC (-40º to 158ºF)
• Operating Humidity: Max 95% relative humidity (non-condensing)
• Storage Humidity: Max 95% relative humidity (non-condensing)
• Water & Dust Proof: IP65

Regulatory

• Certifications: FCC Part 15 Rules for U-NII devices & IC - RSS-210
• ETSI - EN 300 328, EN 301 489 1/17, EN 301 893 v1.5.1, EN 302 502, EN50385

Physical Specification

• Dimensions (LxWxH)    
  • Packaged: 385 x 315 x 110 mm
  • Unpackaged: 197.5 x 192 x 100mm
• Weight
  • Packaged: 2.25 kg (4.96 lbs)
  • Unpackaged: 0.69 kg (1.51 lbs)

Electrical

• Device Power Rating: 7 watts (typical), 13.8 watts (max)
• Powering Input: via PoE Power Injector, 48V-DC 0.40A (included in the package)

LEDS

• MTBF: >75,000 hours
• Warranty: 1 year parts and labor

Package Contents 

• One CPE unit with 16dBi integrated antenna
• PoE Power Injector with power cord
• Pole Mounting kit
• Grounding kit
• Connector Weather Proofing kit
• printed Quick Installation guide

Specifications Tab

Questions Tab