Teltonika OTD140 Technical Specifications

MOBILE

• Mobile module- 4G (LTE) - LTE Cat 4 150 Mbps DL, 50 Mbps UL; 3G - 21 Mbps DL, 5.76 Mbps UL; 2G - 236.8 kbps DL, 236.8 kbps UL
• SIM switch- 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
• Status- Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
• SMS- SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
• USSD- Supports sending and reading Unstructured Supplementary Service Data messages
• Black/White list- Operator black/white list
• Band management- Band lock, Used band status display
• APN- Auto APN
• Bridge- Direct connection (bridge) between mobile ISP and device on LAN
• Passthrough- Router assigns its mobile WAN IP address to another device on LAN

ETHERNET

• LAN- 2 x ETH ports (can be configured as WAN), 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

POE IN

• PoE ports- 1 x PoE In
• PoE standards- 802.3af/at

POE OUT

• PoE ports- 1 x PoE Out
• PoE standards- 802.3af
• PoE Max Power per Port (at PSE)- 15 W (only available if device is powered by 802.3at PoE In)

NETWORK

• Routing- Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
• Network protocols- TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
• VoIP passthrough support- H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
• Connection monitoring- Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
• Firewall- Port forward, traffic rules, custom rules
• Firewall status page- View all your Firewall statistics, rules, and rule counters
• Ports management- View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
• Network topology- Visual representation of your network, showing which devices are connected to which other devices
• DHCP- Static and dynamic IP allocation, DHCP Relay
• QoS / Smart Queue Management (SQM)- Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
• DDNS- Supported >25 service providers, others can be configured manually
• Network backup- VRRP, Wired options, each of which can be used as an automatic Failover
• Hotspot- Captive portal (Hotspot), internal/external Radius server, SMS authorisation, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and option to upload and download customised hotspot themes
• SSHFS- Possibility to mount remote file system via SSH protocol

For full tec specs please see the datasheet linked above.