Ubiquiti NanoStation Loco M5 MIMO Wireless Bridge/Base Station

Based on 1 ratings.

Write a Review

SKU:LOCOM5

62.24EURexc. VAT

74.69EUR inc. VAT

Qty:

Product available

Order in 00h 00m for delivery

UK Cable for PoE Injector Required?:
NanoStation Wall Mount Required:
POE Mount:
802.3af Outdoor Adapter:
Need Product Setup / Training / Support?:

If you are a Wireless or comms reseller and are interested in selling 4Gon products as part of your business offering, you can apply to become an authorised reseller. Once accepted, you will have access to reseller pricing. Apply now

Ubiquiti NanoStation Loco M5 Datasheet (PDF)
Ubiquiti NanoStation Loco M5 Quick Start Guide (PDF)

Key Features

Throughput - 150+ Mbps
Range - 10+ km
on-board LED indicator

Product Details
Specification
Reviews
Questions

Ubiquiti NanoStation Loco M5 MIMO PtP/PtMP Bridge/Base Station LOCOM5

Please Note: The Ubiquiti NanoStations are not 802.3af compliant. You will require a Ubiquiti Instant 802.3af Outdoor Adapter if you are using a POE switch.

Please Note: Remote support is available to help you configure this product. Please select, using the above attributes.

The Ubiquiti NanoStation Loco M5 provides a secondary ethernet port with software enabled PoE output for seamless IP Video integration. The unit features a panel antenna and dual-polarity performance, which is ideal for Point-to-MultiPoint (PtMP) applications requiring high-performance CPE devices.

Ubiquiti airMAX NanoStation Loco M5 Features

Connect two locations or points via wireless, with 5Ghz 802.11n
Throughput - 150+ Mbps
Range - 10+ km
Signal strength, which is reported by the on-board LED indicator
AP mode, client or WDS with Traffic shaping and QoS

Intelligent POE
Remote hardware reset circuitry of the Ubiquiti NanoStation Loco M5 allows for the device to be reset remotely from power supply location. In addition, any Ubiquiti NanoStation can easily become 802.3af 48V compliant through use of Ubiquiti's Instant 802.3af adapter.

Remote reset is an additional option. Ubiquiti NanoStation M comes standard as 24V without remote reset.

Please visit the Ubiquiti Firmware page for the latest Firmware upgrades

Ubiquiti airMAX NanoStation Loco M5 - Technical Specifications

System Information

Processor Specs: Atheros MIPS 24KC, 400 MHz
Memory: 32 MB SDRAM, 8 MB Flash
Networking Interface: (1) 10/100 Ethernet Port

Regulatory/Compliance Information

Wireless Approvals: FCC Part 90Z
RoHS Compliance: Yes

Physical/Electrical/Environmental

Dimensions (mm): 163 x 31 x 80
Weight: 0.18 kg
Power Supply (PoE): 24V, 0.5A
Max. Power Consumption: 5.5 W
Gain: 13 dBi
Polarisation: Dual Linear
Enclosure Characteristics: Outdoor UV Stabilised Plastic
Mounting: Pole Mounting Kit Included
Power Method: Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
Operating Temperature: -30 to 75° C
Operating Humidity: 5 to 95% Condensing
Shock and Vibration: ETSI300-019-1.4

Operating Frequency Summary (MHz)

Worldwide: 5170 - 5875
USA: 5725 - 5850
USA DFS: 5250 - 5850

Antenna Information

Gain: 13 dBi
Cross-pol Isolation: 20 dB Minimum
Max. VSWR: 1.4:1
Beamwidth: 45° (H-pol) / 45° (V-pol) / 45° (Elevation)

Specifications Tab

by Peter Hitchcock So far so good. Am using this to provide a bridge to a barn/office away from the house rather than s.. See full review 5 of 5 Stars!

Date Added: Tuesday 01 October, 2013

Displaying 1 to 1 (of 1 reviews)

Result Pages: 1

Questions Tab