Ubiquiti UniFi WiFi 6 Lite Access Point (U6-Lite)
The Ubiquiti UniFi6 Lite is a 2x2 WiFi 6 access point that can reach an aggregate throughput rate up to 1.5 Gbps with its 5 GHz (MU-MIMO and OFDMA) and 2.4 GHz (MIMO) bands.
The U6 Lite can either be ceiling-mounted to broaden signal coverage and support device-dense networks, or it can be mounted to a wall to extend its signal in a specific direction.
The compact U6 Lite also sports the same form factor as the Access Point nanoHD (UAP nanoHD) so you can repurpose its covers and recessed mounting bracket if you already own them. The U6 Lite simplifies the process of bringing WiFi 6 to your home or office. It can be set up in minutes and fully managed with the UniFi Network web application or mobile app.
Ubiquiti UniFi U6-Lite Key Features
- 2x2 high-efficiency WiFi 6
- 5 GHz band 2x2 MU-MIMO and OFDMA with radio rate of 1.2 Gbps
- 2.4 GHz band 2x2 MIMO with radio rate of 300 Mbps
- Gigabit Ethernet, powered with 802.3af PoE
- Compatible with UAP-nanoHD covers and recessed mounting bracket
Less interference with OFDMA
With OFDMA, Wi-Fi 6 access points not only deliver higher-volume data packets, but tactically parse and deliver data to multiple devices simultaneously, drastically improving their upload and download speeds.
Two-stream, high-efficiency Wi-Fi 6 technology
Wi-Fi 6 APs deliver an aggregate radio rate of up to 1.5 Gbps with 5 GHz (2x2 MU-MIMO and OFDMA) and 2.4 GHz 2x2 MIMO radios.
Powerful, wider wireless coverage
The U6-Lite access point utilizes Wi-Fi 6 technology to provide strong and expansive wireless coverage to all enterprise networking environments.
Ubiquiti UniFi U6-Lite - Technical Specifications
Mechanical
- Dimensions: Ø160 x 32.65 mm (Ø6.3 x 1.3")
- Weight:
- Without Mount: 300 g (10.6 oz)
- With Mount: 315 g (11.1 oz)
- Enclosure Characteristics: Polycarbonate 110 and ADC12 Die Casting
- Mounting Characteristics: Polycarbonate, SGCC Steel
Hardware
- Processor Specs: 880 MHz MIPS 1004 KEc
- Memory Information: 256 MB
- Management Interface: Ethernet In-Band
- Networking Interface: (1) 10/100/1000 Mbps Ethernet RJ45
- Buttons: Factory Reset
- LEDs: White/Blue
- Power Method: 802.3af PoE, Passive PoE (48V)
- Power Supply: 802.3af PoE; 48V, 0.32A PoE Adapter (Not Included)
- Supported Voltage Range: 44 to 57VDC
- Max. Power Consumption: 12W
- Max. TX Power
- 2.4GHz: 23 dBm
- 5GHz: 23 dBm
- MIMO:
- 2.4GHz: 2 x 2-
5GHz: 2 x 2
- Throughput Speeds
-2.4GHz: 300 Mbps
- 5GHz: 1201 Mbps
- Antenna Gain
- 2.4GHz: 2.8 dBi
- 5GHz: 3 dBi
- Operating Temperature: -30 to 60° C (-22 to 140° F)
- Operating Humidity: 5 - 95% Noncondensing
- Certifications: CE, FCC, IC
Software
- WiFi Standards
- 802.11a/b/g
- WiFi 4/Wi-Fi 5/Wi-Fi 6
- Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
- BSSID 8 per Radio
- VLAN: 802.1Q
- Advanced: QoS Per-User Rate Limiting
- Guest Trafc Isolation: Supported
- Concurrent Clients: 300+
Supported Data Rates (MBPS)
- 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11n (Wi-Fi 4): 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)
- 802.11b: 1, 2, 5.5, 11 Mbps
- 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11ac: (Wi-Fi 5): 6.5 Mbps to 866.7 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80)
- 802.11ax: (Wi-Fi 6) 6.3 Mbps to 1.2 Gbps (MCS0 - MCS11 NSS1/2, HE 20/40/80)
